> I've got the tower on the ground. (60 feet of Rohn 25 with a Missle top
> and a Ham IV Rotor)
>
> I'm thinking about going with either a C3 an A3S or something of that
> nature for the Tribander.. One thought I had, was to go with the C4, and just
> have it all on one boom, but that would be the ONLY thing I could put on that
> tower then. I'm trying to find a happy medium between performance and wind
> load.. Plus, I'm trying to get some VHF/UHF stuff up there as well. I may
> get stupid, and just add a 3rd set of guys, because one of my solutions was
> right at 10.3 (It's rated for 10.1) sq. feet and I get everything I want.
> (Yes, I know.) I also know that in my area, I seldom get gusts above 50mph.
>
> What I'm most likely going to do at this point, is go with this rotatable
> dipole design I've been looking at, and a C3. Then 3 Elements on 6M, 9
> Elements on 2M and 20 Elements on 70cm. (All Horizontal), add a 3rd set of
> guys, instead of the recommended two sets, and hope for the best.
>
> Dave
How about a C3SS?
Perhaps you could add drooping extensions to either
end of the boom and load it on 40M?
You may still have spare tower capacity for a vhf/uhf beam!
--
Thanks! & 73,
doc, KD4E
... somewhere in FL
http://bibleseven.com
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|