At 10:37 AM 8/16/2006, Larry Phipps wrote:
>An excellent source of quality dummy loads is
>http://ridgeequipment.com/store/page1.html
>
>Check out the 75W ones for $9.00. I have checked these out on my HP VNA
>and they are excellent. Only drawback for you is that they use a N
>connector, but they have others. Most really good attenuators and dummy
>loads use N connectors (or BNC).
excellent.. I don't need "excellent" attenuators, just ones that are
reasonably stable and can absorb a few watts of power. They are hooking up
to something with SO239s, but adapters aren't out of the question.
>Larry N8LP
>www.telepostinc.com
>"Home of the groundbreaking LP-100 Digital Vector Wattmeter"
>
>
>
>Jim Lux wrote:
>>I'm looking for inexpensive HF dummy loads for a phased array
>>project. They only need to handle 10 Watts or so, and preferably would
>>have PL259 connectors on them (as opposed to SO239).
>>
>>I have a few of the $40 MFJ260's (25W continuous rating) and they're in
>>the ballpark, but since I need a bunch of them, I'm looking for something
>>less expensive, if it exists.
>>
>>Just looking aroundn for other sources of such things.
>>
>>
>>_______________________________________________
>>
>>
>>
>>_______________________________________________
>>TowerTalk mailing list
>>TowerTalk@contesting.com
>>http://lists.contesting.com/mailman/listinfo/towertalk
>>
>>
>>
>>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|