Towertalk
[Top] [All Lists]

Re: [TowerTalk] something *really*completely different..andsimple... (Tr

To: "Mike, K6BR" <noddy1211@sbcglobal.net>,"'K6XN'" <k6xn@comcast.net>,'Robert Chudek - KØRC' <k0rc@pclink.com>,<towertalk@contesting.com>
Subject: Re: [TowerTalk] something *really*completely different..andsimple... (True North)-
From: "Eugene Balinski" <eugeneb@nni.com>
Date: Sat, 26 Aug 2006 20:13:01 -0400
List-post: <mailto:towertalk@contesting.com>
Pilots remember it this way:   east is least (subtract the
Mag declination) and west is best (add).   Just a quick way
to remember. 

  73
    Gene K1NR


On Sat, 26 Aug 2006 12:21:52 -0700
 "Mike, K6BR" <noddy1211@sbcglobal.net> wrote:
> Ted,
> 
> It might be worth adding that your example will be the
> opposite for folks on
> the east coast with a minus declination. If the
> instructions are followed in
> the link below, it will be possible to know your
> declination, if any by
> entering your zip code.
> 
> http://www.thecompassstore.com/decvar.html#
> 
> Mike k6BR
> 
> 
> Bob and Team
> 
> Here at my location in California the magnetic
> declination is approx 17
> degrees. I simply point or adjust my rotor controller to
> indicate 17 degrees
> and adjust the antenna(s) to point *Magnetic North* using
> a military
> compass. It seems to work just fine every time for every
> antenna and rotor
> combination. When I rotate my antenna to point true north
> according to the
> rotor controller indicator it then points to true north.
> Thereafter my
> rotor/controller/antenna ensemble pretty accurately
> points where I want them
> to point. Simple but it works...and works well. Try
> it...great for Field Day
> operations and mountain top VHF contests too....!  :-)
> 
> GL and 73, Ted, K6XN
> 
> 
> 
> -----Original Message-----
> From: towertalk-bounces@contesting.com
> [mailto:towertalk-bounces@contesting.com] On Behalf Of
> Robert Chudek - KØRC
> Sent: Friday, August 25, 2006 8:03 PM
> To: towertalk@contesting.com
> Subject: [TowerTalk] And now for something completely
> different (True
> North)- was Re: Mast -- Drill or not?
> 
> HEY!!! Did I hear someone asking how to determine "True
> North"?!?!?!?!?  It
> was kinda hard to hear over the S-9 Hoot Owl thread and
> +20 dB generator
> noise right now... :-)
> 
> As everyone knows, there's been enough threads regarding
> finding "True
> North" to weave a fine pair of socks... But that aside,
> you can use Goggle
> Earth to determine "that direction" using their tool to
> zoom into any
> location in question. The map defaults to N/S
> orientation.
> 
> I verified my antenna alignment by picking a known object
> a half mile away
> from my tower. In my case it happens to be the east side
> of a church down
> the road. Not all areas on earth have been mapped with
> high resolution yet,
> so this technique might not work for everyone.
> 
> Credit goes to my late father who taught me this "lining
> up" technique when
> we were fishing on Mille Lacs Lake (about 27 miles
> across) locating specific
> fishing spots. This in the 1950's, way before GPS.
> 
> 73 de Bob - K0RC in MN
> 
> 
> Message: 1
> Date: Fri, 25 Aug 2006 09:01:21 -0700
> From: "Michael" <noddy1211@sbcglobal.net>
> Subject: Re: [TowerTalk] Mast -- Drill or not?
> To: <wa3afs@inav.net>, <towertalk@contesting.com>
> Message-ID: <000d01c6c85f$b62c9060$0f01a8c0@Mikes2>
> Content-Type: text/plain; charset="us-ascii"
> 
> http://www.thecompassstore.com/decvar.html#
> 
> Try the above link to work out your Declination, there is
> a link on the
> site to a calculator.  I doubt you would be as much as 30
> degrees off
> true north, I am 18 degrees here by SFO.
> _______________________________________________
> 
---------------------------------------------------------------------
Web mail provided by NuNet, Inc. The Premier National provider.
http://www.nni.com/

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>