Towertalk
[Top] [All Lists]

Re: [TowerTalk] 3 element or 4 element beam

To: towertalk@contesting.com
Subject: Re: [TowerTalk] 3 element or 4 element beam
From: Bill Turner <dezrat@copper.net>
Date: Tue, 15 May 2007 11:05:31 -0700
List-post: <mailto:towertalk@contesting.com>
ORIGINAL MESSAGE:

On Tue, 15 May 2007 13:57:18 -0400, "David Jordan"
 <wa3gin@comcast.net> wrote:

>Marketing HYPE... with AGC set your expectation to >3db before you hear the
>difference.

------------ REPLY FOLLOWS ------------

If the AGC is working correctly, you should have a huge change in
signal strength before you hear the difference, far more than 3 db. An
AGC range of 40 to 60 db is not uncommon. That's why an S2 signal has
the same audio volume as one at 60 over 9. 

But again, this has nothing to do with signal to noise ratio.

Bill W6WRT
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>