Thanks guys,
I will check the hardware store just in case they have something not listed
at their website.
I better get something which covers up to 2" in diameter, because most of
pipe cutters work only with pipes up to 1"1/8 in size.
2007/12/7, David Robbins K1TTT <k1ttt@arrl.net>:
>
> There are different size cutters. The common ones you will find in local
> plumbing stores probably cover .25" to 1.5" or maybe a bit bigger.
>
> If you go to http://www.mcmaster.com/ and search for 'tubing cutter' you
> will see a wide assortment. The ones you normally find in stores are
> either
> the F or G styles.
>
>
> David Robbins K1TTT
> e-mail: mailto:k1ttt@arrl.net
> web: http://www.k1ttt.net
> AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
>
>
> > -----Original Message-----
> > From: towertalk-bounces@contesting.com [mailto:towertalk-
> > bounces@contesting.com] On Behalf Of Alex Malyava
> > Sent: Friday, December 07, 2007 18:41
> > To: towertalk@contesting.com
> > Subject: Re: [TowerTalk] How do I cut aluminum pipes?
> >
> > OK, looks like a pipe cutter is the way to go.
> >
> > I was afraid that the cutter used in plumbing fits only one or two sizes
> > of
> > copper pipes they use and it would not cover all the sizes we use for
> > antennas, like from 1/4 to 2 inches.
> > If it fits them all - I will buy one tonight :)
> >
> > K2BB
> >
> >
> > 2007/12/7, Gene Smar <ersmar@verizon.net>:
> > >
> > > Alex:
> > >
> > > I use a pipe cutter, available at any hardware store, to cut
> > aluminum
> > > tubing for Yagis, etc. It works really well with minimal effort and
> > minimal
> > > risk of off-angle cutting as I have done with hacksaws. (I'm at the
> age
> > now
> > > where I just buy the damn tool if I need it. Took me most of a
> lifetime
> > to
> > > learn that lesson.)
> > >
> > >
> > > 73 de
> > > Gene Smar AD3F
> > >
> > >
> > > From: Alex Malyava <alex.k2bb@gmail.com>
> > > Date: 2007/12/07 Fri PM 12:06:25 CST
> > > To: towertalk@contesting.com
> > > Subject: [TowerTalk] How do I cut aluminum pipes?
> > >
> > > Hi guys,
> > > I just got an 5-BTV vertical which I gonna take to some DX country
> with
> > > me.
> > >
> > > I need to cut two longest pieces in order to fit it in 48" golf bag
> case
> > > to
> > > check it in.
> > > Is it enough to use regular hacksaw and sand the edges or there is
> some
> > > fancy tool like pipe cutter used in plumbing?
> > >
> > > I think if such tool exists I would better get one, because I have
> more
> > > "aluminum" projects in mind :)
> > >
> > > Alex K2BB
> > > _______________________________________________
> > >
> > >
> > >
> > > _______________________________________________
> > > TowerTalk mailing list
> > > TowerTalk@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/towertalk
> > >
> > >
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|