Towertalk Mailing List (date)

Towertalk Mailing List (date)

[Thread Index] [Top] [All Lists]

December 31, 2007

Re: [TowerTalk] K2GL rotators, etc, Michael Tope, 23:49
[TowerTalk] kt34xa flat swr, john, 22:36
[TowerTalk] K2GL, john, 22:36
[TowerTalk] HyGain 10M OWA, N7KA, 22:07
[TowerTalk] Big Bertha, N7KA, 22:01
Re: [TowerTalk] Big Berthas, john, 21:40
[TowerTalk] kt34xa flat swr, mike oconnor, 21:26
[TowerTalk] K2GL rotators, etc, kr2q, 21:02
[TowerTalk] Cost of cement base, Artmouton, 18:44
Re: [TowerTalk] Big Berthas, David Robbins K1TTT, 17:51
[TowerTalk] Big Berthas, Bill N1eY, 17:35
Re: [TowerTalk] Spread Spectrum, JAMES HEADRICK, 16:11
Re: [TowerTalk] Great K2GL Photos, Tom Osborne, 16:08
Re: [TowerTalk] concrete, Artmouton, 16:01
Re: [TowerTalk] Original Hygain/Military-Commercial Products, donovanf, 16:00
Re: [TowerTalk] Tower Update, AD5VJ Bob, 14:02
Re: [TowerTalk] 160 RX antenna. What kind of choke?, Richard (Rick) Karlquist, 13:38
Re: [TowerTalk] 160 RX antenna. What kind of choke?, Dan Zimmerman N3OX, 13:10
Re: [TowerTalk] 160 RX antenna. What kind of choke?, Colman Ahern, 12:55
Re: [TowerTalk] Hedy Lamar and SS, David Robbins K1TTT, 12:42
Re: [TowerTalk] concrete, David Gilbert, 12:41
[TowerTalk] RE: Hedy Lamar and SS, Reicher, James, 12:15
[TowerTalk] Hedy Lamar and SS, Larry Essary, 10:16
Re: [TowerTalk] Original Hygain/Military-Commercial Products, Gene Smar, 09:47
Re: [TowerTalk] Original Hygain/Military-Commercial Products, Jim Lux, 09:27
Re: [TowerTalk] Original Hygain/Military-Commercial Products, Pat Barthelow, 08:57
[TowerTalk] Great K2GL Photos, donovanf, 07:43
Re: [TowerTalk] concrete, Artmouton, 07:24
Re: [TowerTalk] MFJ Hygain verses Original Hygain, Jan Erik Holm, 05:30
[TowerTalk] Whoops......K2GL/N2AA "To Win The World" - bad date info, BobK8IA, 05:02
Re: [TowerTalk] MFJ Hygain verses Original Hygain, BobK8IA, 04:58
Re: [TowerTalk] MFJ Hygain verses Original Hygain, Jan Erik Holm, 04:51
Re: [TowerTalk] MFJ Hygain verses Original Hygain, Dan Zimmerman N3OX, 04:35
Re: [TowerTalk] MFJ Hygain verses Original Hygain, Chris Pedder, 04:33
[TowerTalk] B&W 551A, Larry & Karen, 02:03
Re: [TowerTalk] Possible rain soaked coax, Jan Erik Holm, 01:22

December 30, 2007

Re: [TowerTalk] How to replace a winch,while the tower is in the raised position, Terrence R. Redding PH.D., 23:34
Re: [TowerTalk] 160 RX antenna, Jim Brown, 23:24
Re: [TowerTalk] 160 RX antenna, Richard (Rick) Karlquist, 22:47
[TowerTalk] Wet coax, Red Haines, 22:21
Re: [TowerTalk] MFJ Hygain verses Original Hygain, Michael Tope, 21:55
Re: [TowerTalk] 160 RX antenna, Dan Zimmerman N3OX, 21:52
Re: [TowerTalk] 160 RX antenna, Dan Zimmerman N3OX, 21:47
Re: [TowerTalk] 160 RX antenna, Dan Zimmerman N3OX, 21:43
Re: [TowerTalk] Tower Update, john, 21:37
Re: [TowerTalk] 160 RX antenna, Alex Malyava, 21:27
Re: [TowerTalk] Tower Update, AD5VJ Bob, 21:21
[TowerTalk] concrete, Its from Onion, 20:49
Re: [TowerTalk] MFJ Hygain verses Original Hygain, Roger (K8RI), 20:48
Re: [TowerTalk] 160 RX antenna, Robert Morris, 20:44
Re: [TowerTalk] MFJ Hygain verses Original Hygain, donovanf, 20:27
Re: [TowerTalk] MFJ Hygain verses Original Hygain, Roger (K8RI), 19:59
Re: [TowerTalk] Tower Update, Roger (K8RI), 19:57
Re: [TowerTalk] Possible rain soaked coax, Roger (K8RI), 19:46
[TowerTalk] 160 RX antenna, Tom Osborne, 19:05
Re: [TowerTalk] Tower Update, John Ammeter, 18:48
Re: [TowerTalk] Tower Update, Larry Burke, 18:16
Re: [TowerTalk] Tower Update, Kenneth R. Goodwin, Jr., 18:08
[TowerTalk] Tuner Bypass Switch, RICHARD SOLOMON, 17:49
Re: [TowerTalk] Tower Update, David Robbins K1TTT, 17:31
Re: [TowerTalk] MFJ vs Original HyGain, Kirk, 17:16
Re: [TowerTalk] Tower Update, AD5VJ Bob, 16:55
Re: [TowerTalk] Tower Update, AD5VJ Bob, 16:53
Re: [TowerTalk] MFJ Hygain verses Original Hygain, Chris Pedder, 16:41
[TowerTalk] Tower guy replacement, K7LXC, 15:49
Re: [TowerTalk] Tower Update, K7LXC, 15:39
[TowerTalk] Tower Update, Larry & Karen, 15:38
[TowerTalk] MFJ vs Original HyGain, Larry & Karen, 15:33
Re: [TowerTalk] Wench vs Winch, Frank J. Connelly, 15:23
Re: [TowerTalk] Wench vs Winch, Frank J. Connelly, 15:21
Re: [TowerTalk] Possible rain soaked coax, Jan Erik Holm, 15:20
Re: [TowerTalk] MFJ Hygain verses Original Hygain, Bob Selbrede, K6ZZ, 15:05
Re: [TowerTalk] MFJ Hygain verses Original Hygain, Chris Pedder, 14:49
Re: [TowerTalk] Possible rain soaked coax, Roger (K8RI), 14:46
Re: [TowerTalk] Possible rain soaked coax, John Hudson, 14:27
Re: [TowerTalk] MFJ Hygain verses Original Hygain, Salvatore Console, 14:15
[TowerTalk] Wench vs. Winch vs. New Year's wishlist, Jim Jarvis, 13:50
Re: [TowerTalk] Wench vs Winch, Roger NØVR, 13:09
[TowerTalk] Possible rain soaked coax, Tom Anderson, 12:22
Re: [TowerTalk] Wench vs Winch, Charles Gallo, 11:56
Re: [TowerTalk] Tower Update, Sandy Taylor, 11:25
Re: [TowerTalk] Wench vs Winch, bill rubin, 11:09
Re: [TowerTalk] Tower Update, Tim Duffy K3LR, 10:40
Re: [TowerTalk] Wench vs Winch, Martin Ewing AA6E, 10:31
Re: [TowerTalk] Tower Update, AD5VJ Bob, 10:30
Re: [TowerTalk] Tower Update, David Robbins K1TTT, 10:04
[TowerTalk] Wench vs Winch, N7KA, 10:01
Re: [TowerTalk] Tower Update, AD5VJ Bob, 09:50
Re: [TowerTalk] How to replace a wench,while the tower is in the raised position, AD5VJ Bob, 09:38
Re: [TowerTalk] How to replace a wench,while the tower is in the raised position, Artmouton, 07:15
Re: [TowerTalk] Where is a good place to buy some miniture airvariable capac..., K2EK, 06:23
Re: [TowerTalk] MFJ Hygain verses Original Hygain, Chris Pedder, 05:33
[TowerTalk] Where is a good place to buy some miniture air variablecapacitores 100pf 600v for some gamma match work on Quad., KZ4USA, 04:01
Re: [TowerTalk] How to replace a wench,while the tower is in the raised position, Bill Turner, 01:54
Re: [TowerTalk] RG-8/RG-213 as C in gamma match, Jan Erik Holm, 01:38
[TowerTalk] How to replace a wench,while the tower is in the raised position, Terrence R. Redding PH.D., 00:39

December 29, 2007

Re: [TowerTalk] Tower Update, Dr. James C. Garland, 21:06
[TowerTalk] Tower Update, AD5VJ Bob, 20:59
[TowerTalk] MFJ Hygain verses Original Hygain, Bob Selbrede, K6ZZ, 19:10
Re: [TowerTalk] Tower temp guy nn7j, john, 18:38
Re: [TowerTalk] Tower temp guy nn7j, bill rubin, 18:08
Re: [TowerTalk] Tower temp guy nn7j, Richard Elizondo, 16:24
Re: [TowerTalk] RG-8/RG-213 as C in gamma match, donovanf, 15:47
[TowerTalk] Tower temp guy nn7j, dan, 15:29
[TowerTalk] RG-8/RG-213 as C in gamma match, Peter, 15:13
Re: [TowerTalk] Soldering flex-weave, WA3GIN, 10:28
Re: [TowerTalk] Drilling tubing (180 deg), Jim Miller, 07:10
Re: [TowerTalk] Soldering flex-weave, John Becker, 07:06
Re: [TowerTalk] Drilling tubing (180 deg), Doug Faunt N6TQS +1-510-655-8604, 01:11
Re: [TowerTalk] Soldering flex-weave, Martin Ewing AA6E, 00:40
Re: [TowerTalk] Soldering flex-weave, Tom Osborne, 00:13
Re: [TowerTalk] Soldering flex-weave, Jim Brown, 00:05

December 28, 2007

[TowerTalk] cleaning Flexweave, Craig Clark, 21:48
Re: [TowerTalk] How do I cut aluminum pipes?, Rick Karlquist, 20:56
Re: [TowerTalk] Soldering flex-weave, Jim McDonald, 20:50
Re: [TowerTalk] Drilling tubing (180 deg), David Gilbert, 19:44
Re: [TowerTalk] Drilling tubing (180 deg), Jim Miller, 19:40
Re: [TowerTalk] Drilling tubing (180 deg), Mike, K6BR, 18:57
Re: [TowerTalk] Drilling tubing (180 deg), RICHARD SOLOMON, 18:49
Re: [TowerTalk] Soldering flex-weave, Bill Cotter, 18:29
Re: [TowerTalk] Soldering flex-weave, bill rubin, 17:44
Re: [TowerTalk] Soldering flex-weave, Martin Ewing AA6E, 17:32
Re: [TowerTalk] Soldering flex-weave, Larry stowell, 16:32
Re: [TowerTalk] Soldering flex-weave, Dan Kovatch, 16:26
[TowerTalk] Soldering flex-weave, Martin Ewing AA6E, 16:07
[TowerTalk] Drilling tubing (180 deg), N7KA, 16:00
Re: [TowerTalk] How do I cut aluminum pipes?, Les Kalmus, 15:51
Re: [TowerTalk] Cutting tubing, Jim Lux, 15:35
Re: [TowerTalk] Cutting tubing, Richard (Rick) Karlquist, 15:26
Re: [TowerTalk] Cutting tubing, Terry, 15:05
[TowerTalk] Cutting tubing, N7KA, 14:39
Re: [TowerTalk] How do I cut aluminum pipes?, Richard (Rick) Karlquist, 14:30
Re: [TowerTalk] How do I cut aluminum pipes?, Roger (K8RI), 14:10
Re: [TowerTalk] How do I cut aluminum pipes?, Jack Brindle, 14:03
Re: [TowerTalk] How do I cut aluminum pipes?, Bill Coleman, 13:32
Re: [TowerTalk] Yaesu G800s Rotator, Terry, 12:27

December 27, 2007

Re: [TowerTalk] Yaesu G800s Rotator, Scott Stembaugh, 22:52
Re: [TowerTalk] 150 ft of 5/16" EHS and 150 ft of 1/4" EHS, Richard Elizondo, 21:13
[TowerTalk] 150 ft of 5/16" EHS and 150 ft of 1/4" EHS, Mike Bragassa, 17:52
Re: [TowerTalk] 5/16" and 1/4" EHS Needed in Small Quantities, john, 17:10
[TowerTalk] Skyhawk EZNEC Model?, Billy Cox, 16:36
Re: [TowerTalk] Tower ACCIDENT, David Robbins K1TTT, 13:51
Re: [TowerTalk] Ma550 groaning, Robert Carroll, 13:49
Re: [TowerTalk] Yaesu G800s Rotator, David Robbins K1TTT, 13:46
Re: [TowerTalk] Yaesu G800s Rotator, David Robbins K1TTT, 13:43
Re: [TowerTalk] Ma550 groaning, Jim Jarvis, 13:40
[TowerTalk] Gold flashed relay contacts useful for antenna relays?, Richard (Rick) Karlquist, 13:16
Re: [TowerTalk] Bamboo Quad Spreaders, Robert G. Strickland, 13:12
Re: [TowerTalk] 5/16" and 1/4" EHS Needed in Small Quantities, Dan Cisson, 13:05
Re: [TowerTalk] 5/16" and 1/4" EHS Needed in Small Quantities, Jim Walker, 12:55
Re: [TowerTalk] 5/16" and 1/4" EHS Needed in Small Quantities, wa5zup, 12:52
[TowerTalk] 5/16" and 1/4" EHS Needed in Small Quantities, Larry Burke, 12:38
Re: [TowerTalk] Tower Incident Survey, Dale Martin, 11:22
[TowerTalk] RE: MA-550 groans, Reicher, James, 11:20
[TowerTalk] Guywires, Phil Camera, 10:28
Re: [TowerTalk] Tower Incident Survey, Bill Coleman, 10:09
Re: [TowerTalk] Tower ACCIDENT, Roger (K8RI), 09:58
Re: [TowerTalk] A103 for A3WS WARC beam, Joe Subich, W4TV, 09:34
[TowerTalk] MA-550 groans, Bruce Mendenhall, 09:18
Re: [TowerTalk] Bamboo Quad Spreaders, Richard HIll, 09:18
Re: [TowerTalk] Tower ACCIDENT, Bill Coleman, 08:25
Re: [TowerTalk] Fiber optics for amateur radio.., Leigh L. Klotz, Jr., 03:06
Re: [TowerTalk] A103 for A3WS WARC beam, Billy Cox, 00:41
Re: [TowerTalk] Bamboo Quad Spreaders, Tom Osborne, 00:12
Re: [TowerTalk] Bamboo Quad Spreaders, Robert Morris, 00:07

December 26, 2007

[TowerTalk] Bamboo Quad Spreaders, NPAlex, 23:44
Re: [TowerTalk] Yaesu G800s Rotator, Scott Stembaugh, 23:29
Re: [TowerTalk] Inverted L.....thanks for the input folks, Jim Brown, 23:28
Re: [TowerTalk] Yaesu G800s Rotator, Scott Stembaugh, 23:15
Re: [TowerTalk] Inverted L.....thanks for the input folks, Jim Lux, 23:13
Re: [TowerTalk] Yaesu G800s Rotator, Mike, K6BR, 21:21
Re: [TowerTalk] Yaesu G800s Rotator, WD0M, 21:04
Re: [TowerTalk] Yaesu G800s Rotator, Pete Smith, 21:01
Re: [TowerTalk] Yaesu G800s Rotator, John Ammeter, 20:52
Re: [TowerTalk] Yaesu G800s Rotator, Blake Meinecke, 20:46
Re: [TowerTalk] Yaesu G800s Rotator, K7LXC, 20:37
Re: [TowerTalk] Bamboo Quad Spreaders, n8de, 20:36
Re: [TowerTalk] A103 for A3WS WARC beam, Jack Brindle, 20:24
Re: [TowerTalk] Yaesu G800s Rotator, RICHARD SOLOMON, 20:11
Re: [TowerTalk] A103 for A3WS WARC beam, Dale Martin, 20:06
Re: [TowerTalk] Inverted L.....thanks for the input folks, Jim Brown, 19:35
Re: [TowerTalk] Shunt fed tower verticals- risks in SO2R?, Clive Whelan, 19:31
Re: [TowerTalk] Yaesu G800s Rotator, Dennis Vernacchia, 19:24
[TowerTalk] Bamboo Quad Spreaders, WA3GIN, 18:58
[TowerTalk] A103 for A3WS WARC beam, joe barkley, 18:52
Re: [TowerTalk] Yaesu G800s Rotator, David Robbins K1TTT, 18:18
Re: [TowerTalk] Shunt fed tower verticals- risks in SO2R?, BobK8IA, 18:16
Re: [TowerTalk] MFJ window feed through #4602, Nathaniel Lee, 18:07
Re: [TowerTalk] Yaesu G800s Rotator, RICHARD SOLOMON, 17:59
[TowerTalk] MFJ window feed through #4602, Tom Anderson, 17:27
[TowerTalk] Inverted L.....thanks for the input folks, John, 17:14
Re: [TowerTalk] Yaesu G800s Rotator, David Robbins K1TTT, 16:54
Re: [TowerTalk] Shunt fed tower verticals- risks in SO2R?, Pete Smith, 16:27
[TowerTalk] Yaesu G800s Rotator, Scott Stembaugh, 15:36
Re: [TowerTalk] Ground radial question, Dan Zimmerman N3OX, 15:32
Re: [TowerTalk] Ground radial question, Its from Onion, 15:19
[TowerTalk] Parallel Inverted L's for 40/75m?? Part II, Todd Coulter, 14:49
[TowerTalk] Shunt fed tower verticals- risks in SO2R?, Clive Whelan, 14:26
Re: [TowerTalk] Ground radial question, n8de, 12:23
Re: [TowerTalk] Ground radial question, Jim Brown, 12:10
[TowerTalk] Ground radial question, Its from Onion, 11:44
Re: [TowerTalk] Parallel Inverted L's for 40/75m??, Todd Coulter, 11:29
Re: [TowerTalk] parallel inverted ell's, Jim Jarvis, 09:12
Re: [TowerTalk] Gloves and other items, Richard Elizondo, 01:05
Re: [TowerTalk] Towers, and bedrock, Richard Elizondo, 01:01

December 25, 2007

Re: [TowerTalk] Gloves and other items, Roger (K8RI), 17:55
[TowerTalk] Gloves and other items, Gene Smar, 17:11
Re: [TowerTalk] Parallel Inverted L's for 40/75m??, Jim Brown, 16:13
[TowerTalk] Parallel Inverted L's for 40/75m??, Todd Coulter, 15:44
Re: [TowerTalk] Inverted L.........., Jim Brown, 13:35
Re: [TowerTalk] Inverted L.........., AD5VJ Bob, 13:19
Re: [TowerTalk] Inverted L.........., Jim Brown, 12:30
[TowerTalk] Force 12 XR-5, Ron Tate, 12:00
[TowerTalk] Inverted L.........., John, 11:59

December 24, 2007

Re: [TowerTalk] Towers, and bedrock, WD0M, 22:41
Re: [TowerTalk] Towers, and bedrock, Gene Smar, 14:11
[TowerTalk] Towers, and bedrock, Charles Gallo, 14:03
[TowerTalk] Crank-Up Tower Base Question, NW2M, 13:10

December 23, 2007

Re: [TowerTalk] be careful out there, Jim Fitzpatrick, 12:37

December 22, 2007

Re: [TowerTalk] Archives, K7LXC, 18:53
Re: [TowerTalk] Archives, W4ZW, 14:56
Re: [TowerTalk] Archives, Artmouton, 14:21
Re: [TowerTalk] Archives, Chet Moore, 14:07
Re: [TowerTalk] Archives, Chet Moore, 14:04
Re: [TowerTalk] question on thrust bearing, Artmouton, 13:26
Re: [TowerTalk] Archives, Bob Nielsen, 12:02
[TowerTalk] Archives, Artmouton, 11:30
[TowerTalk] Hazer, Steve Litwins, 08:42
Re: [TowerTalk] Tower Base Construction Question(s), K7LXC, 08:29
Re: [TowerTalk] question on thrust bearing, K7LXC, 08:09
[TowerTalk] Crimp Coax Connector Differences, Larry Essary, 07:29

December 21, 2007

Re: [TowerTalk] TX-472 was stuck..., Alan NV8A, 21:40
[TowerTalk] TX-472 was stuck..., John Ammeter, 21:25
[TowerTalk] Be Careful out there, Pat Barthelow, 15:24
Re: [TowerTalk] W6NL XM240 to Moxon Conversion PDF on www.k3lr.com, Pete Smith, 08:55
Re: [TowerTalk] UHF Male Crimpon for LMR-600?, Andre Van Wyk, 08:41
Re: [TowerTalk] UHF Male Crimpon for LMR-600?, Roger (K8RI), 04:35

December 20, 2007

Re: [TowerTalk] UHF Male Crimpon for LMR-600?, Roger (K8RI), 23:30
Re: [TowerTalk] W6NL XM240 to Moxon Conversion PDF on www.k3lr.com, Tim Duffy K3LR, 23:12
Re: [TowerTalk] W6NL XM240 to Moxon Conversion PDF on www.k3lr.com, Dino Darling, 23:09
[TowerTalk] W6NL XM240 to Moxon Conversion PDF on www.k3lr.com, Tim Duffy K3LR, 22:41
Re: [TowerTalk] UHF Male Crimpon for LMR-600?, Andre Van Wyk, 22:37
[TowerTalk] UHF Male Crimpon for LMR-600?, Roger (K8RI), 22:33
Re: [TowerTalk] Generator (natural gas) and lightning, Ian White GM3SEK, 02:44
Re: [TowerTalk] question on thrust bearing, Roger (K8RI), 00:49
Re: [TowerTalk] question on thrust bearing, Dino Darling, 00:32

December 19, 2007

[TowerTalk] question on thrust bearing, Mikemedic130, 22:14
[TowerTalk] Crimp Coax Connector Differences, RICHARD SOLOMON, 18:42
Re: [TowerTalk] Generator (natural gas) and lightning, Ken, 18:19
Re: [TowerTalk] Generator (natural gas) and lightning, David Robbins K1TTT, 17:09

December 18, 2007

Re: [TowerTalk] Generator (natural gas) and lightning, Marlon Schafer, 23:39
Re: [TowerTalk] Topband: Antenna Noise canceller, Jim Brown, 21:52
Re: [TowerTalk] 75m Choke Requirements, Jim Brown, 21:51
Re: [TowerTalk] Roof Tower Safety, jd_hudson, 21:49
[TowerTalk] 75m Choke Requirements, Gedas, 21:35
Re: [TowerTalk] Roof Tower Safety, larryjspammenot@teleport.com, 18:25
Re: [TowerTalk] Roof Tower Safety, Bill Turner, 18:06
Re: [TowerTalk] Roof Tower Safety, Pete Smith, 17:05
Re: [TowerTalk] Roof Tower Safety, larryjspammenot@teleport.com, 17:00
Re: [TowerTalk] Tower Base Construction Question(s), Andre Van Wyk, 15:53
[TowerTalk] Tower Base Construction Question(s), Marinus Willemstijn, 12:49
Re: [TowerTalk] Generator (natural gas) and lightning, David Jordan, 10:55
Re: [TowerTalk] Generator (natural gas) and lightning, Commtekman, 10:52
Re: [TowerTalk] Generator (natural gas) and lightning, Blake Bowers, 09:18
[TowerTalk] Tower Incident Survey, Just Justin, 05:44
Re: [TowerTalk] network cable outdoors, Just Justin, 05:44
Re: [TowerTalk] unguyed with house bracket, Just Justin, 05:44
Re: [TowerTalk] Generator (natural gas) and lightning, Just Justin, 05:44
[TowerTalk] Roof Tower Safety, Just Justin, 05:44

December 17, 2007

[TowerTalk] Yagi antennas for sale, Scott W3TX, 21:47
[TowerTalk] Antenna Tree, Ken, 21:47
Re: [TowerTalk] Antenna Tree, Tom Osborne, 21:45
[TowerTalk] Antenna Tree, Ken, 19:17
Re: [TowerTalk] US TOWER TMM-541SS, TOMMY HALIBURTON, 16:40
Re: [TowerTalk] RF Relay Question, Dr. James C. Garland, 09:07
Re: [TowerTalk] US TOWER TMM-541SS, Eugene Jensen, 02:58

December 16, 2007

[TowerTalk] US TOWER TMM-541SS, TOMMY HALIBURTON, 23:49
[TowerTalk] yaesu repair help, Thomas Tow, 23:23
Re: [TowerTalk] RF Relay QUestion, Jim Lux, 14:28
Re: [TowerTalk] RF Relay QUestion, Tim Duffy K3LR, 12:54
Re: [TowerTalk] RF Relay QUestion, Mike, 11:43
[TowerTalk] RF Relay QUestion, K2EK, 10:59
Re: [TowerTalk] RF Relay Question, Dr. James C. Garland, 09:33
Re: [TowerTalk] RF Relay QUestion, Terry - AB5K, 09:28
[TowerTalk] RF Relay QUestion, Dennis OConnor, 08:53
[TowerTalk] RF Relay QUestion, Garland, James C. Dr., 08:39
[TowerTalk] 13B2 File, JMLTINC, 08:39
Re: [TowerTalk] RF Relay QUestion, Jim Lux, 01:54
Re: [TowerTalk] RF Relay QUestion, Tim Duffy K3LR, 01:46
Re: [TowerTalk] RF Relay QUestion, David Gilbert, 00:52
[TowerTalk] RF Relay QUestion, Dr. James C. Garland, 00:09

December 15, 2007

Re: [TowerTalk] Yaesu Connectors, David J Windisch, 16:05
[TowerTalk] Yaesu Connectors, Robert Hess, 14:22

December 14, 2007

Re: [TowerTalk] 160 inv L, Terry G. Glagowski, 20:31
Re: [TowerTalk] Repair help, Cqtestk4xs, 17:23
Re: [TowerTalk] Repair help, Ron Chambers, 17:16
[TowerTalk] Repair help, Thomas Tow, 15:19
Re: [TowerTalk] 160m Antenna Planning, Gene Smar, 10:49
Re: [TowerTalk] Linear loaded 160 L, Jim Brown, 09:30
[TowerTalk] Linear loaded 160 L, Dennis OConnor, 07:28
[TowerTalk] Linear loaded 160 L, Tom Osborne, 01:12

December 13, 2007

Re: [TowerTalk] 160 inv L....data....need some experience...., john, 16:45
Re: [TowerTalk] 160-m. Inverted L Question, john, 16:40
Re: [TowerTalk] 160 inv L....data....need some experience...., Jim Brown, 15:19
[TowerTalk] 160 inv L....data....need some experience...., John, 14:40
Re: [TowerTalk] Line Noise, W6SX Hank Garretson, 14:25
Re: [TowerTalk] 160-m. Inverted L Question, Terry Conboy, 13:57
Re: [TowerTalk] 160-m. Inverted L Question, WD0M, 13:40
Re: [TowerTalk] 160-m. Inverted L Question, Bill Turner, 13:36
Re: [TowerTalk] Line Noise, Pat Barthelow, 13:23
Re: [TowerTalk] 160m Antenna Planning, Gene Smar, 13:15
Re: [TowerTalk] Line Noise, Dennis OConnor, 12:34
[TowerTalk] 160m Antenna Planning, Richardson, Ed, 12:02
Re: [TowerTalk] Line Noise, Jim Brown, 11:48
[TowerTalk] HF-2V Comments, RICHARD SOLOMON, 10:47
Re: [TowerTalk] Line Noise, bill rubin, 10:32
Re: [TowerTalk] Line Noise, n0rq-lists, 09:57
Re: [TowerTalk] Line Noise, Dr. James C. Garland, 09:26
Re: [TowerTalk] Line Noise, Peter Forbes, 09:11
[TowerTalk] Line Noise, Dennis OConnor, 08:33

December 12, 2007

[TowerTalk] Butternut HF-2V: Comments ? Pro & Con, RICHARD SOLOMON, 23:35
Re: [TowerTalk] 160-m. Inverted L Question, wa3afs, 20:11
Re: [TowerTalk] 160-m. Inverted L Question, Jim Brown, 19:35
Re: [TowerTalk] 160-m. Inverted L Question, donovanf, 19:34
Re: [TowerTalk] 160-m. Inverted L Question, Mike Fatchett W0MU, 19:29
[TowerTalk] 160-m. Inverted L Question, RLVZ, 19:18
Re: [TowerTalk] Vendors for 1 3/4 inch mast material?, Penninger Radio, 08:33

December 11, 2007

Re: [TowerTalk] Vendors for 1 3/4 inch mast material?, Julio Peralta, 21:52
Re: [TowerTalk] Vendors for 1 3/4 inch mast material?, Roger (K8RI), 21:46
[TowerTalk] Vendors for 1 3/4 inch mast material?, Bill Howell, 21:21
[TowerTalk] WTB: Rohn 25G Tilt Base, Robin Midgett, 16:38
Re: [TowerTalk] PL-259 Voltage Breakdown, Jim Lux, 14:21
Re: [TowerTalk] PL-259 Voltage Breakdown, Steve Katz, 13:42
Re: [TowerTalk] PL-259 Voltage Breakdown, Roger (K8RI), 13:33
Re: [TowerTalk] PL-259 Voltage Breakdown, Bill Turner, 12:53
[TowerTalk] WTB: Inexpensive Deep Sea Fishing Reel (Not OT), Joe Giacobello, 12:28
Re: [TowerTalk] PL-259 Voltage Breakdown, AA6DX, 12:21
[TowerTalk] Boom Splice Strength, ac9s, 12:18
Re: [TowerTalk] 45/55 Star Guy, Bill Cotter, 11:41
Re: [TowerTalk] PL-259 Voltage Breakdown, Ron Chambers, 11:15
Re: [TowerTalk] W6NL moxon, Dino Darling, 10:57
Re: [TowerTalk] EZ Master OOOPS!, K7LXC, 10:16
[TowerTalk] EZ Master, Steve and Judy, 03:40
Re: [TowerTalk] EZ Master OOOPS!, Steve and Judy, 02:19

December 10, 2007

[TowerTalk] PL-259 Voltage Breakdown, K6QD, 23:25
[TowerTalk] Force 12 manual needed, David Greer, 21:50
[TowerTalk] 45/55 Star Guy, don daso, 21:50
Re: [TowerTalk] Pipe Cutters, Alex Malyava, 10:09
Re: [TowerTalk] EZ Master OOOPS!, K7LXC, 08:45
Re: [TowerTalk] EZ Master OOOPS!, David Gilbert, 03:16
Re: [TowerTalk] EZ Master OOOPS!, Steve and Judy, 02:10

December 09, 2007

Re: [TowerTalk] Pipe Cutters, Roger (K8RI), 22:30
Re: [TowerTalk] Pipe Cutters, Bill Coleman, 21:48
Re: [TowerTalk] EZ Master, Chet Moore, 20:45
[TowerTalk] EZ Master, M.H.Bragassa, 20:38
Re: [TowerTalk] pl259-rg6, R. David Eagle, 18:13
Re: [TowerTalk] W6NL 40-2CD => Moxon Conversion, charlie carroll, 17:43
Re: [TowerTalk] Crimp on PL-259's for RG-6U, Jim Brown, 17:21
Re: [TowerTalk] pl259-rg6, John Hudson, 16:21
Re: [TowerTalk] EZ Master OOOPS!, K7LXC, 15:52
Re: [TowerTalk] pl259-rg6, Jim Jarvis, 12:46
Re: [TowerTalk] EZ Master, almacottage, 12:20
[TowerTalk] Crimp on PL-259's for RG-6U, R. David Eagle, 08:43
[TowerTalk] EZ Master, Steve and Judy, 02:11

December 08, 2007

Re: [TowerTalk] push on pl 259's, David Gilbert, 21:03
Re: [TowerTalk] push on pl 259's, Joe Eide, 19:45
Re: [TowerTalk] push on pl 259's, David Gilbert, 19:38
Re: [TowerTalk] push on pl 259's, Roger (K8RI), 19:34
Re: [TowerTalk] push on pl 259's, Joe Eide, 19:20
[TowerTalk] push on pl 259's, KLM, 18:41
[TowerTalk] Pipe Cutters, Nick Pair, 17:49
Re: [TowerTalk] W6NL 40-2CD => Moxon Conversion, john, 16:58
Re: [TowerTalk] TowerTalk Digest, Vol 60, Issue 22, Robert Chudek, 16:18
Re: [TowerTalk] Pipe Cutters, Richard (Rick) Karlquist, 15:33
Re: [TowerTalk] Cutting Aluminum, Phil Snyder, 15:33
[TowerTalk] Tubing Cutter Alternative, RICHARD SOLOMON, 13:42
[TowerTalk] More Moxon Stuff, David Gilbert, 12:32
Re: [TowerTalk] Pipe Cutters, Jim Lux, 12:24
Re: [TowerTalk] W6NL 40-2CD => Moxon Conversion, David Gilbert, 11:22
Re: [TowerTalk] Pipe Cutters, Bill Cotter, 11:17
Re: [TowerTalk] Another aluminum question, Jim Lux, 11:07
Re: [TowerTalk] Cutting Aluminum, Frederick M. Mott, 10:40
Re: [TowerTalk] W6NL 40-2CD => Moxon Conversion, Joe Subich, W4TV, 10:17
Re: [TowerTalk] Pipe Cutters, Jeff Goldman, 10:00
Re: [TowerTalk] W6NL 40-2CD => Moxon Conversion, WA3GIN, 09:45
Re: [TowerTalk] Pipe Cutters, Bill Turner, 09:44
Re: [TowerTalk] W6NL 40-2CD => Moxon Conversion, Samir Popaja, 7S7V (SM7VZX), 03:20
Re: [TowerTalk] W6NL 40-2CD => Moxon Conversion, Samir Popaja, 7S7V (SM7VZX), 03:20
Re: [TowerTalk] W6NL 40-2CD => Moxon Conversion, Samir Popaja, 7S7V (SM7VZX), 03:18
Re: [TowerTalk] W6NL 40-2CD => Moxon Conversion, Samir Popaja, 7S7V (SM7VZX), 03:15
Re: [TowerTalk] W6NL 40-2CD => Moxon Conversion, Samir Popaja, 7S7V (SM7VZX), 03:11
Re: [TowerTalk] W6NL 40-2CD => Moxon Conversion, Samir Popaja, 7S7V (SM7VZX), 03:08
Re: [TowerTalk] Pipe Cutters, Richard (Rick) Karlquist, 02:33
Re: [TowerTalk] Pipe Cutters, Richard (Rick) Karlquist, 02:32

December 07, 2007

[TowerTalk] Fw: Pipe Cutters, sabrams, 23:21
Re: [TowerTalk] Pipe Cutters, Mike, K6BR, 22:49
Re: [TowerTalk] Pipe Cutters, VE6WZ_Steve, 22:44
Re: [TowerTalk] Pipe Cutters, Mike, K6BR, 22:36
[TowerTalk] Pipe Cutters, Dan Hearn, 22:16
Re: [TowerTalk] W6NL 40-2CD => Moxon Conversion, Bob Selbrede, K6ZZ, 20:53
Re: [TowerTalk] XM-240 to Moxon 240, john, 19:25
Re: [TowerTalk] Another aluminum question, Alex Malyava, 19:00
[TowerTalk] W6NL 40-2CD => Moxon Conversion, Tony Brock-Fisher, 18:58
Re: [TowerTalk] Another aluminum question, Jim Lux, 18:08
[TowerTalk] Another aluminum question, Alex Malyava, 17:11
Re: [TowerTalk] How do I cut aluminum pipes?, Chet Moore, 15:40
[TowerTalk] 40-2CD Info - Many thanks., Roger Cooke, 15:19
Re: [TowerTalk] XM-240 to Moxon 240, TexasRF, 14:52
Re: [TowerTalk] XM-240 to Moxon 240, k2qmf, 14:49
Re: [TowerTalk] W6NL moxon, GALE STEWARD, 14:19
Re: [TowerTalk] How do I cut aluminum pipes?, Charette, Douglas, 14:10
Re: [TowerTalk] How do I cut aluminum pipes?, Alex Malyava, 14:04
Re: [TowerTalk] How do I cut aluminum pipes?, David Robbins K1TTT, 13:51
[TowerTalk] W6NL moxon over C31XR, Hector Garcia XE2K, 13:51
Re: [TowerTalk] How do I cut aluminum pipes?, Richard (Rick) Karlquist, 13:47
Re: [TowerTalk] How do I cut aluminum pipes?, Alex Malyava, 13:41
Re: [TowerTalk] How do I cut aluminum pipes?, Gene Smar, 13:29
Re: [TowerTalk] How do I cut aluminum pipes?, David Robbins K1TTT, 13:17
[TowerTalk] How do I cut aluminum pipes?, Alex Malyava, 13:06
Re: [TowerTalk] XM-240 to Moxon 240, Ron Chambers, 11:20
Re: [TowerTalk] XM-240 to Moxon 240, Tim Duffy K3LR, 09:40
[TowerTalk] XM-240 to Moxon 240, Bob Selbrede, K6ZZ, 09:25
Re: [TowerTalk] Cushcraft 40-2CD skywalker, Bill Parry, 08:35

December 06, 2007

Re: [TowerTalk] Cushcraft 40-2CD skywalker, Mike Fatchett W0MU, 17:14
Re: [TowerTalk] Mounting a Remote Antenna Switch?, Jim Lux, 17:07
Re: [TowerTalk] [PVRC] Mounting a Remote Antenna Switch?, Gene Smar, 15:26
Re: [TowerTalk] Cushcraft 40-2CD skywalker, W7TMT, 15:23
[TowerTalk] Mounting a Remote Antenna Switch?, Eric Rosenberg, 15:22
Re: [TowerTalk] Cushcraft 40-2CD skywalker, Dick Green WC1M, 14:44
[TowerTalk] 40-2CD vs XM-240, Gregg Seidl, 11:54
[TowerTalk] Fwd: 40-2CD, Ron Chambers, 09:57
[TowerTalk] Cushcraft 40-2CD skywalker, Roger Cooke, 09:54
Re: [TowerTalk] 40-2CD, Dino Darling, 04:14
Re: [TowerTalk] Thrust Bearings, J. Gordon Beattie, Jr., W2TTT, 02:52
Re: [TowerTalk] Thrust Bearings, Tod -ID, 01:01

December 05, 2007

[TowerTalk] Thrust Bearings, Roger (K8RI), 22:12
Re: [TowerTalk] CATV Hardline Connectors, K2EK, 18:23
Re: [TowerTalk] Rohn Trust Bearing/an ounce of prevention...., john, 17:35
Re: [TowerTalk] Capacitors To Tune 160 Vertical, Jim Brown, 17:12
Re: [TowerTalk] Capacitors To Tune 160 Vertical, Bill Turner, 16:18
Re: [TowerTalk] Capacitors To Tune 160 Vertical, David Gilbert, 16:02
Re: [TowerTalk] Capacitors To Tune 160 Vertical, Bill Turner, 13:59
Re: [TowerTalk] Swing Tower, Larry stowell, 11:19
Re: [TowerTalk] Sommers Antenna company status + upgrades ???, Neal Campbell, 10:48
Re: [TowerTalk] Swing Tower, bob finger, 10:00
Re: [TowerTalk] 40-2CD, Ron Chambers, 09:55
[TowerTalk] Swing Tower, Lee Buller, 09:44
Re: [TowerTalk] Rohn Trust Bearing/an ounce of prevention...., Wayne Kline, 09:31
Re: [TowerTalk] Question re Sky Needle rotor cage (Update), Dr. James C. Garland, 09:16
Re: [TowerTalk] Rohn Trust Bearing/an ounce of prevention...., Bill Parry, 09:11
[TowerTalk] CATV Hardline Connectors, Gary Jones, 08:35
[TowerTalk] Sommers Antenna company status + upgrades ???, Bob Dorsey, 07:26
Re: [TowerTalk] Rohn Trust Bearing/an ounce of prevention...., Roger (K8RI), 01:53
Re: [TowerTalk] Rohn Trust Bearing/an ounce of prevention...., Cqtestk4xs, 00:50

December 04, 2007

Re: [TowerTalk] Crank-Up Tower Base Question, K4SAV, 23:41
Re: [TowerTalk] Crank-Up Tower Base Question, K7LXC, 23:18
[TowerTalk] HZ-71 tower, kb9si, 22:27
Re: [TowerTalk] 40-2CD, K4SAV, 21:42
Re: [TowerTalk] 40-2CD, Doug Renwick, 21:02
Re: [TowerTalk] Crank-Up Tower Base Question, Alan NV8A, 20:44
Re: [TowerTalk] Crank-Up Tower Base Question, RICHARD SOLOMON, 18:45
Re: [TowerTalk] Rohn Trust Bearing, Roger (K8RI), 18:39
Re: [TowerTalk] Be Careful, Randy, 18:25
Re: [TowerTalk] Rohn Trust Bearing, Bill Parry, 18:08
[TowerTalk] Rohn Trust Bearing, Bill Parry, 16:48
Re: [TowerTalk] 40-2CD, Mike Fatchett W0MU, 15:51
Re: [TowerTalk] Question re Sky Needle rotor cage, Don Moman VE6JY, 14:26
Re: [TowerTalk] winch to lift tower, Carmine W Prestia Jr, 14:26
Re: [TowerTalk] Question re Sky Needle rotor cage, Perry - K4PWO, 11:32
Re: [TowerTalk] Fiber optics for amateur radio.., Ron Chambers, 10:37
Re: [TowerTalk] Fiber optics for amateur radio.., Jim Lux, 10:11
Re: [TowerTalk] Question re Sky Needle rotor cage, Dubovsky, George, 10:08
[TowerTalk] Question re Sky Needle rotor cage, Garland, James C. Dr., 10:05
[TowerTalk] Question re Sky Needle rotor cage, Garland, James C. Dr., 09:29
Re: [TowerTalk] 40-2CD, Ted Bryant, 08:05
Re: [TowerTalk] Fiber optics for amateur radio.., David Robbins K1TTT, 06:32
Re: [TowerTalk] Fiber optics for amateur radio.., Jim Lux, 00:45
Re: [TowerTalk] Fiber optics for amateur radio.., Richard (Rick) Karlquist, 00:11

December 03, 2007

Re: [TowerTalk] Be Careful, Gregg Martell, 22:34
[TowerTalk] winch to lift tower, katy white, 22:30
Re: [TowerTalk] radial connections, Larry DiGioia N8KU, 21:08
Re: [TowerTalk] 40-2CD, Mike Fatchett W0MU, 20:42
[TowerTalk] Fiber optics for amateur radio.., Jim Lux, 20:23
[TowerTalk] connected, Steve Jarrett, 17:36
Re: [TowerTalk] Be Careful, Roger (K8RI), 14:51
[TowerTalk] 40-2CD, Lloyd Bell, 12:32
Re: [TowerTalk] Be Careful, Pat Barthelow, 09:50
[TowerTalk] **Idiom Press- No Response to E-Mails, Phone calls,No Product shipped.**, David Weiss, 08:49

December 02, 2007

[TowerTalk] Be Careful, Phil Young, 23:53
[TowerTalk] Where to buy Safety Gear (URL's), Bill Cotter, 22:01
Re: [TowerTalk] Crank-Up Tower Base Question, Larry WA9VRH, 20:01
Re: [TowerTalk] Crank-Up Tower Base Question, Al Williams, 19:39
Re: [TowerTalk] Crank-Up Tower Base Question, res1q6fs, 19:06
[TowerTalk] Crank-Up Tower Base Question, Tim Lacy, 19:01
[TowerTalk] Gamma match shorting bar, JohnPerz, 18:32
Re: [TowerTalk] radial connections, Dan Hearn, 16:30
[TowerTalk] Safety Gear, Kim Elmore, 16:11
Re: [TowerTalk] Crank-Up Tower Base Question, John Ammeter, 15:56
Re: [TowerTalk] Crank-Up Tower Base Question, David Gilbert, 15:37
Re: [TowerTalk] Crank-Up Tower Base Question, Gene Smar, 15:35
Re: [TowerTalk] radial connections, Larry DiGioia N8KU, 15:20
Re: [TowerTalk] Crank-Up Tower Base Question, Al Williams, 15:18
[TowerTalk] Crank-Up Tower Base Question, RICHARD SOLOMON, 15:09
[TowerTalk] Thanks re gamma fixing, Roger Cooke, 14:22
Re: [TowerTalk] radial connections, Dan Hearn, 11:16
Re: [TowerTalk] Irrigation pipe vertical, Red Haines, 10:50
[TowerTalk] radial connections, Larry DiGioia N8KU, 10:45
[TowerTalk] 40m vertical, michael castellano, 07:37
Re: [TowerTalk] Star guying, Steve Maki, 07:31

December 01, 2007

Re: [TowerTalk] 40 Meter Vertical, Dennis Ashworth, 16:29
Re: [TowerTalk] Irrigation pipe vertical, David Gilbert, 16:25
Re: [TowerTalk] 40 Meter Vertical, Jack/W6NF, 15:58
Re: [TowerTalk] Irrigation pipe vertical, WA3GIN, 15:05
Re: [TowerTalk] Irrigation pipe vertical, Rick Karlquist, 14:35
Re: [TowerTalk] Irrigation pipe vertical, Dan Hearn, 14:33
Re: [TowerTalk] Gamma fixing, Dan Hearn, 14:20
Re: [TowerTalk] Irrigation pipe vertical, Red Haines, 14:10
Re: [TowerTalk] Gamma fixing, Byron Lichtenwalner, 14:08
[TowerTalk] Gamma fixing, Roger Cooke, 14:01
Re: [TowerTalk] Irrigation pipe vertical, Red Haines, 13:51
[TowerTalk] 40m Vertical(s), AA6DX, 13:46
Re: [TowerTalk] Irrigation pipe vertical, Red Haines, 13:01
Re: [TowerTalk] 40 Meter Vertical, Roger (K8RI), 12:34
Re: [TowerTalk] 40 Meter Vertical, Tom Osborne, 12:10
Re: [TowerTalk] 40 Meter Vertical, Richard Thorne, 11:57
Re: [TowerTalk] 40 Meter Vertical, Dan Hearn, 11:36
Re: [TowerTalk] 40 Meter Vertical, Pat Chiles, 10:56
Re: [TowerTalk] Star guying, WA3GIN, 10:54
Re: [TowerTalk] Star guying, K7LXC, 10:48
Re: [TowerTalk] 40 Meter Vertical, WA3GIN, 10:47
Re: [TowerTalk] 40 Meter Vertical, n8de, 10:37
Re: [TowerTalk] 40 Meter Vertical, WA3GIN, 09:24
[TowerTalk] 40 Meter Vertical, Paul Sturpe, 08:34