Towertalk
[Top] [All Lists]

Re: [TowerTalk] XM-240 to Moxon 240

To: rwchambers@gmail.com
Subject: Re: [TowerTalk] XM-240 to Moxon 240
From: k2qmf@juno.com
Date: Fri, 7 Dec 2007 14:47:39 -0500
List-post: <mailto:towertalk@contesting.com>
Hello All,

All this talk about converting the 402CD to Moxon has got my
curiosity up.  I am using a 402CD here.
Can someone please give me the location of this mod info.

Many Thanks in advance...

73,
Ted  K2QMF

 
On Fri, 7 Dec 2007 10:19:58 -0600 "Ron Chambers" <rwchambers@gmail.com>
writes:
> Bob -
> 
> Almost there!
> 
> W5WW and myself  have a  two-high stack of 402CD's at KC5FU we 
> intend to
> convert to Dave's Moxon shortly, partly based on neighbor (K5MR) 
> great
> reports after installing one of Dave's "ground-up" Moxons (at 
> 140ft). But we
> won't actually do the modified 402CD versions until we finish (75% 
> done at
> the second) building one of the "ground-up" versions. Then we will 
> do the
> "take one down, put one up" change-out routine for the 402's...so 
> will have
> story to tell...soon....I hope!
> 
> Ron
> N5QQ
> 
> 
> 
> 
> On 12/7/07, Bob Selbrede, K6ZZ <k6zz@ccis.com> wrote:
> >
> > I'm suprised there hasn't been much chatter on TT from folks
> > converting their stock 402-CD or XM-240 over to the Moxon
> > design published by W6NL.  I wonder how many of them have
> > been built and are in the air being used today?  The mod
> > concept has been around for several years and it seems
> > straightforward.  The benefits of the conversion appear to
> > be significant (improved Gain, F/B, 7.0-7.3 SWR under 1.5:1,
> > no coils, no interaction with stacked tribanders, etc).
> > Seems like a great mod to do.
> >
> > I have a new XM-240 assembled and ready to install and I'm
> > giving thought to modifying it before installing it.  Has
> > anyone had bad experiences with this mod?
> >
> > Bob K6ZZ
> >
> >
> > ----- Original Message Follows -----
> > From: "Bill Parry" <bparry@rgv.rr.com>
> > To: <towertalk@contesting.com>
> > Subject: Re: [TowerTalk] Cushcraft 40-2CD skywalker
> > Date: Fri, 7 Dec 2007 07:34:53 -0600
> >
> > > FYI. I just replaced all four coils on the elements on my
> > > XM240 (lightning) and the replacement cost for the new
> > > coils from Cushcraft is $50 apiece. The replacement parts
> > > seem to be readily available.
> > >
> > > Bill, W5VX
> > >
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 
> 
 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>