Towertalk
[Top] [All Lists]

Re: [TowerTalk] Yaesu G800s Rotator

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] Yaesu G800s Rotator
From: "Mike, K6BR" <noddy1211@sbcglobal.net>
Date: Wed, 26 Dec 2007 18:21:39 -0800
List-post: <mailto:towertalk@contesting.com>
#1 been there and broke the clamp.
#2 Always pinned it like Yaesu suggests with no problems.

Mike

-----Original Message-----
 
#1 is absolutely correct, nay even critical.  #2 has not been my experience 
in 11 years with three different Yaesu rotators, all pinned.

73, Pete N4ZR



At 08:46 PM 12/26/2007, Blake Meinecke wrote:
>#1 Tighten the mast clamp EXACTLY LIKE the instructions say
>#2 Resist the urge to pin the mast to it!!!!
>
>Ignore #1 and you'll break the clamp.
>Ignore #2 and you'll end up with an aluminum housing full of thousands of
>little bits and pieces.
>
>
>73,
>Blake N4GI
>
> > -----Original Message-----
> > From: towertalk-bounces@contesting.com [mailto:towertalk-
> > bounces@contesting.com] On Behalf Of RICHARD SOLOMON
> > Sent: Wednesday, December 26, 2007 22:54
> > To: k1ttt@arrl.net; towertalk@contesting.com
> > Subject: Re: [TowerTalk] Yaesu G800s Rotator
> >
> > I am considering the YAESU  G-2800DXA for my LM-470.
> > Am I making a mistake ??
> >
> > 73, Dick, W1KSZ/7
> >
>
>
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>