Towertalk
[Top] [All Lists]

Re: [TowerTalk] Crank up Tower

To: towertalk@contesting.com, k0son@frontiernet.net
Subject: Re: [TowerTalk] Crank up Tower
From: K7LXC@aol.com
Date: Sat, 23 Feb 2008 13:02:06 EST
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
 
In a message dated 2/23/2008 9:02:49 A.M. Pacific Standard Time,  
towertalk-request@contesting.com writes:

>  I'm new to the list & need some information on Heights  Crank up towers 
without the tilt over feature. OK here's the background. I use  to have a 50 ft 
Universal at my old house. I liked the tower, but 50 ft is now  above my 
comfort level for working on towers, I'd like to get a crankup and  think the 
Heights would be good one. So, I would like to get in contact with  anyone who 
currently owns, or has owned a Heights crank up. I've read their  web site & 
now 
want to talk to owners & get the real  story.


        A customer of mine bought a  100-foot version. He had never had a 
tower before and bought it because he could  get it in his backyard without too 
much trouble and then he'd have a 100' tower.  After everything was done, he 
wanted a professional opinion about his  installation. He made one fatal error 
in locating the guy anchors which we  corrected.         
 
        EVERYTHING about this tower  was undersized and under-engineered IMO. 
The 3 base bolts were 1/2" or so. The  winch and haul lines were inadequate - 
the winch got real hot as we were  cranking it up. I can't remember if the 
cables were rope or steel - they  might've been rope. 
 
        This was a guyed tower  which meant you had to be VERY careful as 
it's being cranked up and then the guy  tensions were all on the haul cables. 
 
        He called the other day as  he was preparing to lower it and the 
safety latch that locked some of the  sections wouldn't release so it wouldn't 
descend. I suggested a couple of things  that I would have done if I'd been 
there 
and he went out to lower it. He called  back a little later and said that he 
indeed got the safety latch to release but  as he was lowering it, the winch 
got away from him and the whole thing  collapsed. The yagi booms bent and the 
whole tower wound up jammed in the lower  section. 
 
        I was saddened to hear  about his calamity because he made some bad 
decisions that led to this  unfortunate occurrence. (OTOH I was glad I wasn't 
the guy that did it.) I would  never have recommended that he buy this tower - 
100' of 45G would have been a  much better decision and it'd still be in the 
air for the next 25 years or more. 
 
        If you've got your heart  set on a crank-up, get a US Tower model. 
They're steel, well built and US Tower  has been known to go out of their way 
for customer service. 
 
Cheers,
Steve     K7LXC
TOWER TECH -
Professional tower services for hams
Cell: 206-890-4188
_www.championradio.com/installs.html_ 
(http://www.championradio.com/installs.html)  



**************Ideas to please picky eaters. Watch video on AOL Living.      
(http://living.aol.com/video/how-to-please-your-picky-eater/rachel-campos-duffy/
2050827?NCID=aolcmp00300000002598)
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>