Sounds like a good idea as well, John. Lots of creative people on this
forum!
73,
Joe WDØM
JMLTINC@aol.com wrote:
> Cool, on the Cool Whip, Joe.
>
> I had the same problem with the thrust bolts. I used a 6" piece of PVC,
> which I split down one side to get it around the mast pipe. I ground some
> reliefs
> at the bottom (where it contacts the thrust bearing shelf) to allow
> drainage.
>
> -John, N9RF
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|