http://www.randl.com should have them in stock
73 N1HWC
On Sat, Mar 15, 2008 at 9:35 PM, <DONMAR1234@aol.com> wrote:
>
> In a message dated 3/15/2008 7:40:03 P.M. Eastern Daylight Time,
> towertalk-request@contesting.com writes:
>
> Message: 3
> Date: Sat, 15 Mar 2008 14:47:00 -0500
> From: "res1q6fs" <roger.white@verizon.net>
> Subject: [TowerTalk] Yaesu G-800DXA Control Box Cable Plug P/N.....
> To: "towertalk" <towertalk@contesting.com>
> Message-ID: <001c01c886d5$561f0a50$6400a8c0@RogersComputer>
> Content-Type: text/plain; charset="iso-8859-1"
>
> I have searched the archives and found only the mention of the plug
> (maybe
> AMP/TYCO), but no actual part number. I am going to call Yaesu Monday,
> but
> does anyone have the P/N of the mating (plug) connector that goes on the
> cable
> inside the shack? It is the white plastic plug. I am going to put in a
> much
> longer cable and do not want to splice at this time. If I can, I'd rather
> order
> from Mouser or Jameco since I am ordering a bunch more stuff next week
> for
> another project.
>
> Thanks!
>
> Roger W5RD
> Murphy, Texas
>
>
>
> The Yaesu connector for the controller is Part #S8101130 and the pins for
> it
> are Part #YP000205. They are available at Burghardt Amateur Center.
> They
> are not expensive. I'm not familiar with the OEM source.
>
> 73,
> Don
> KW7R
>
>
>
> **************It's Tax Time! Get tips, forms, and advice on AOL Money &
> Finance. (http://money.aol.com/tax?NCID=aolprf00030000000001)
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|