Towertalk
[Top] [All Lists]

Re: [TowerTalk] XM-240 Tuning Issues

To: 'wa5zup' <wa5zup@msn.com>, towertalk@contesting.com
Subject: Re: [TowerTalk] XM-240 Tuning Issues
From: Doug Renwick <ve5ra@sasktel.net>
Date: Sun, 06 Apr 2008 08:00:24 -0600
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
John,

The CC balun is 1:1 but the XM 240 does not have any matching - gamma,
T, hairpin, etc.  That is why a 2:1 balun is a better choice.

Doug Renwick

"Those Island days are always on my mind,
Someday I'm going to leave it all behind."

-----Original Message-----

I thought the XM240 balun was a 1:1?
The XM240 balun they supply is just teflon coax wound (4 or 5 turns I
think)around three ferrite cores
The older CC antennas used a coax coil balun and grounded the reflector.
John
Wa5zup

-----Original Message-----

Greg,

Is this a brand new CC antenna?

Something is wrong with the SWR ... you should see 1.4 or 1.5 at 7.062
MHz which is correct.

The reflector on the XM is NOT grounded to the boom.

The matching network you are referring to is probably the CC balun.  I
would replace it with an Array Solutions AS-25-1 2:1 balun.

Doug



_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>