I had a stack of TH7's for many years...BN-86's died and I replaced with
the BN-4000. No problems ever with these...Almost indestructible.
http://www.hy-gain.com/man/pdf/BN-4000B.pdf
73 Rich N7TR
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Eric - VE3GSI
Sent: Tuesday, April 08, 2008 9:08 AM
To: Towertalk e-Goups
Subject: [TowerTalk] Any BN-86 Balun Replacement Suggestions?
TT Gang,
It looks like my BN-86 Balun used on a TH7-DX beam is giving me grief.
The
antenna was assembled to use the DX or lower portions of the bands. The
SWR
measurements are good on 20 meters, but on 15 and 10 meters the SWR is
1.2:1
on the CW portion of the band. After doing some basic research and
talking
with a friend we have come to the conclusion the Balun may be causing my
SWR
problems. I am considering a new Balun for as a replacement from DX
Engineering. DXE have several models to choose from so I will have to
wade
through the details, but several obvious questions come up.
How do you mount these Baluns on a beam and is the ground strap still
required for beam mounting or does one 'float' the Balun electrical
ground?
Which DXE Balun model works best on the THY antenna?
Are there other Baluns I should consider for using with the TH7 antenna?
Thanks gang,
Eric - VE3GSI
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|