Hi all,
Does anybody happen to know the correct Erico part number for the
reusable Cadweld mold that I would need to bond 2" copper strap to a
standard 5/8" x 8-foot long ground rod?
I'm looking for the one that bonds the full 2" width of the strap to
the body of the rod so that I can use it below my existing
AWG#4-solid welds to the tops of the ground rods.
I have not purchased the final copper strapping that will connect to
the tower legs so I'm not sure whether the commonly-available
strapping is 20 or 26 gauge - and I believe the molds are different
for each type.
My halo-ground is mostly in-place now, but the
tower-legs-to-ground-system straps need to go below the halo, as does
the shack-to-ground system.
Thanks in advance.
Regards,
Peter,
W2IRT
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|