Towertalk
[Top] [All Lists]

Re: [TowerTalk] Guying Material and resonance

To: bill rubin <brubin2010@gmail.com>
Subject: Re: [TowerTalk] Guying Material and resonance
From: "Roger (K8RI)" <K8RI-on-TowerTalk@tm.net>
Date: Wed, 11 Jun 2008 17:58:29 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
bill rubin wrote:
> John,
> I used both Phillystran and EHS.  I used Phillystran about 2/3 on the top
> guy connected to EHS 1/4",  then about 1/3 Phillystran for the middle
> connect to EHS 1/4", for the bottom i used just EHS 1/4.   Even if you can
> afford to use all  Phillystran it is *Strongly recommended*
> to use EHS 1/4 on the bottom 10 ft for protection against Fire or
>   

The largest EHS on 25G in the ROHN book is 3/16" even when going to 190'

Roger (K8RI - ARRL Life Member)
www.rogerhalstead.com
N833R (World's oldest Debonair)

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>