Its easier to remove the cables and spray them. I stake one end on the
edge of the yard with the cable laying on the CLEAN concrete side walk.
I'll lift the cable in my hand using a rag behind it to absorb the
overspray. I walk backwards letting the anchored cable run through my
hands. I keep a constant pool of Prelube 6 flowing over the cable as I
spray it into my rag covered hand.
I've also done this IN the tower and it is a mess. YMMV.
Dino - K6RIX
dino@k6rix.com
-------- Original Message --------
Subject: [TowerTalk] How many cans of Prelube 6?
From: "Scott McClements" <kc2pih@gmail.com>
Date: Wed, July 16, 2008 10:34 am
To: "Towertalk Reflector" <towertalk@contesting.com>
I think I've decided on Prelube 6 for the new cables for my HDX572.
How many spray cans would I need and what is the best way to apply it
the first time? Should I spray the cables off the tower and then
install - or is that a mess? Install first and then coat?
-Scott, WU2X
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|