Towertalk
[Top] [All Lists]

Re: [TowerTalk] sealing conduit

To: W5CPT <w5cpt@bellsouth.net>, TowerTalk@contesting.com, Gregg Seidl <k9kl@centurytel.net>
Subject: Re: [TowerTalk] sealing conduit
From: Gene Smar <ersmar@verizon.net>
Date: Thu, 31 Jul 2008 19:33:37 -0500 (CDT)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Greg:

     For ten years before I installed my tower in the back yard, I had a bunch 
of wire antennas strung through the trees.  The coax to these antennas exited 
my shack through the crawl space underneath via a 4-inch hole I cut into the 
header board with a hole saw.  

     I then installed a drier vent assembly (for a clothes drier exhaust) into 
the hole and ran the coaxes out that way.  I used a large piece of fiberglass 
insulation to plug up the hole, yet allow for future additions to the antenna 
farm.  Worked great, lasted a long time and was cheap.

     The trick is to ensure that the conduit opening points downward so that 
the insulation doesn't get rained on.


73 de
Gene Smar  AD3F


From: W5CPT <w5cpt@bellsouth.net>
Date: 2008/07/31 Thu PM 07:29:27 EDT
To: Gregg Seidl <k9kl@centurytel.net>, TowerTalk@contesting.com
Subject: Re: [TowerTalk] sealing conduit

Greg,
I have had great luck with Copper Scrubbies.  I buy them in the Kitchen 
department at Wal*Mart in packs of 4.  I stuff them into the open ends of my 
conduit (2 inch) and can easily remove and reinsert them. They keep the 
critters out (and I have lots around) I think because they don't like to chew 
on metal, and still allow the conduit to breathe.

Clint - W5CPT
  
  ----- Original Message ----- 
  From: Gregg Seidl 
  To: TowerTalk@contesting.com 
  Sent: Thursday, July 31, 2008 6:20 PM
  Subject: [TowerTalk] sealing conduit


  I'm wondering how other seal conduit runs out to the towers.
      I installed 4 inch non-perforated drain tile to both my towers.MUCH MUCH 
  cheaper then pvc conduit.I want to seal the ends up in a way to keep 
  critters out.I'm not too worried about water because I believe it is 
  impossible to keep water out no matter what you do.I use cables cables that 
  are direct burial..I also want to allow it to "breathe".I thought of used 
  that foam stuff that you can use to seal up cracks around your windows and 
  such.Then I'd drill a small 3/16 maybe hole behind  the plug to allow it to 
  breathe.Plus this way when I get a stupid idea to install another antenna 
  all I need to do is get the stuff out which is easy.
      I'm always open to other ideas.  Gregg K9KL 


  _______________________________________________



  _______________________________________________
  TowerTalk mailing list
  TowerTalk@contesting.com
  http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>