Towertalk
[Top] [All Lists]

[TowerTalk] Skyneedle re rigging

To: towertalk@contesting.com
Subject: [TowerTalk] Skyneedle re rigging
From: KG4LRU@aol.com
Date: Wed, 13 Aug 2008 22:21:58 EDT
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Guys looking for help on re rigging  a TM 5100 R,C?  I have  completely 
refurbished the tower and repainted it ready to go back together  .  I have 
several 
manuals and documents But none of these actually our for  my Tower . This 
Tower was purchased used .Karl folks have not come up with the  correct cabling 
diagram as yet . 
 
The Tower I have uses two cables  the first one is bolted in the  bottom of 
the tower making impossible to recabled the tower  in the  standing position . 
This cable gos through the winch terminates on the turn  buckle . The second 
cable attaches to the 10 p eye bolt and runs over the 6p  pulley terminates at 
the bottom of the 6p section.. My problem is the main cable  How it is strung. 
  any one that has photos or diagrams I would be  happy to pay for 
duplication  or I fly out and take some photos .
 
 
 
 
Phil Zavagli AI4DQ
 
502-339-9567 my office or cell 502-345-0543 



**************Looking for a car that's sporty, fun and fits in your budget? 
Read reviews on AOL Autos.      
(http://autos.aol.com/cars-BMW-128-2008/expert-review?ncid=aolaut00050000000017 
)
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Skyneedle re rigging, KG4LRU <=