Towertalk
[Top] [All Lists]

Re: [TowerTalk] Dipole Center Connector

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Dipole Center Connector
From: jim Jarvis <jimjarvis@optonline.net>
Date: Tue, 18 Nov 2008 09:54:54 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
AD5VJ wrote:

>>
>> I am working on building a dipole for 80 meters.
>>
>> I have the wire, poles and rope needed to string it, but dont
>> have the money right now to buy the Budwig PL-259 center
>> connector for it.
>>
>> Any ideas what I can use that will actually keep the antenna
>> up there for a while, I have come up with some ideas, but
>> would like to work from good ol' reliable successful
>> experience instead of trying to reinvent the wheel.

Bob... I've never used one of those ready made things for a dipole,  
and I've been doing it
since 1958.   Simply take the coax, and strip it back so you have two  
pigtails of about 3" long.
Take a simple end insulator, loop the coax over it, tightly, and  
fasten with a tie-wrap.   Then, solder
the pigtails to the dipole legs.   I've generally used 'household  
goop' to seal up the
end of the coax, where I've made the pigtails, just to minimize water  
incursion.
But that end should be facing down, in any case,  so water won't pour  
in.

If you tightly wrap things with electrical tape, it won't hurt any,  
and may look better, as well.

N2EA
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>