Here's a link to one way to fabricate an insulated base.
http://mysite.verizon.net/vze7hjw3/id2.html
Here's the ones available from Comtek Systems. They look excellent but are
pretty expensive.
http://www.comteksystems.com/
73, Stew K3ND
--- On Mon, 4/13/09, Roger (K8RI) <K8RI-on-TowerTalk@tm.net> wrote:
> From: Roger (K8RI) <K8RI-on-TowerTalk@tm.net>
> Subject: Re: [TowerTalk] Rohn 20/25G leg insulator material
> To:
> Cc: TowerTalk@contesting.com
> Date: Monday, April 13, 2009, 8:36 PM
> Mark Robinson wrote:
> > The consensus was to use solid FR4 G10 rod.
> >
> I wonder about that as ground fiberglass is sensitive to
> degradation by
> moisture and UV.
>
> > These guys sell it and I believe that they can do the
> machining required.
> >
> > http://www.jjorly.com/g10_rod_rods.htm
> >
> I think I also saw a $250 minimum order.
>
> 73
>
> Roger (K8RI)
> >
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|