Thanks Jim -
If it was 25AG2 I'd be home free. :-) But I don't think it is,
therefore the pic for ID.
73, Mike NF4L
Jim Brown wrote:
> On Thu, 16 Jul 2009 19:11:05 -0400, Mike wrote:
>
> I just went through that with a used 25AG2. Measured it with a micrometer,
> it was something like 2.07 inches i.d. Bought the heaviest 2-inch mast from
> Texas Towers. It fits very nicely. The mast is something like 2.02 or so.
>
> BTW -- in line with the discussion about "getting it home" -- I had Texas
> Towers cut their 10 ft mast down to 9 ft so that UPS would ship it. No
> charge for cutting, but I bought a 10 ft mast. I figure it's a nice match
> for a Yaesu G1000 rotator and my 3-el SteppIR.
>
> 73,
>
> Jim K9YC
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|