Aside from the fundamentally bad idea of turning an expensive mast into
Swiss cheeze, have you considered how impractical it would be to drill
3/4 inch holes in a mast while it is up on top of the tower?
And if you weigh enough to worry about whether 1.5 inch angle steel of
ANY grade is strong enough to support you, you don't belong on a tower.
Dave AB7E
AD5VJ Bob wrote:
> What would be wrong with just drilling a hole through the mast and installing
> some 3/4" stainless steel all thread rod through the
> mast say every 8" or so. Then screw on two nuts on each side (one as a backup
> nut) to secure it to the mast.
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|