I didn't tie mine off except at the top. The top section has Kellum
grips supporting the coax. The coax slips through the lower stand offs
and as I lower the tower, I coil the coax bundle near the base of the
tower.
I have a supporting arm in the top standoff. I use separate feed lines
fir each antenna.
Dick, K6KR
Sent from my iPhone
On Sep 13, 2009, at 11:52 PM, <n7uvh@yahoo.com> wrote:
> Does anyone have an idea on how to tie off the coax on a crankup
> tower that fixs inside it self, I just tie and tape up the coax on
> the top of the top section the best I cul.
> tnx
> Murf
> n7uvh@yahoo.com
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|