I don't have any standoffs except the one at the top of my LM470. At the
top I used heavy garden hose around the coax & rotator feed in a large arc
to distribute the force. The coax & lines drop easily to the ground when
lowering the tower.
k7puc
----- Original Message -----
From: "Dick Dievendorff" <dieven@comcast.net>
To: <n7uvh@yahoo.com>
Cc: <towertalk@contesting.com>
Sent: Monday, September 14, 2009 9:24 AM
Subject: Re: [TowerTalk] stand offs on crankup tower
>I didn't tie mine off except at the top. The top section has Kellum
> grips supporting the coax. The coax slips through the lower stand offs
> and as I lower the tower, I coil the coax bundle near the base of the
> tower.
>
> I have a supporting arm in the top standoff. I use separate feed lines
> fir each antenna.
>
> Dick, K6KR
>
>
> Sent from my iPhone
>
> On Sep 13, 2009, at 11:52 PM, <n7uvh@yahoo.com> wrote:
>
>> Does anyone have an idea on how to tie off the coax on a crankup
>> tower that fixs inside it self, I just tie and tape up the coax on
>> the top of the top section the best I cul.
>> tnx
>> Murf
>> n7uvh@yahoo.com
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|