If you have confirmed everything is good including the coax, I am
guessing the loaded boom on the 10M Yagi is the problem. I would move
it in line with the new 20M Yagi and see what happens to the SWR.
What is the SWR at 14.100, 14.200 and 14.300?
Stan, K5GO
----- Original Message -----
From: "Jorge Diez - CX6VM" <cx6vm.jorge@adinet.com.uy>
To: <TOWERTALK@contesting.com>
Sent: Sunday, December 27, 2009 11:40 AM
Subject: [TowerTalk] M2 20M5 SWR
> Hello,
>
>
>
> I installed a M2 antenna, 20M5 at 33 mts. I assembly it for FULL BAND
> dimensions
>
>
>
> I have in the same tower a stack of three XM510 monobanders for 10
> mts, the
> top one is 3 mts over the 20M5 cross at 90 degrees from the 20M5.
>
>
>
> At 14000 I have 2.9:1
>
>
>
> This will be because of the other 10 mts antennas in the same tower?
> Or at
> FULL BAND the 20M5 have this swr at 14000?
>
>
>
> Thanks!
>
>
>
> 73,
>
> Jorge
>
> CX6VM
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|