Towertalk
[Top] [All Lists]

Re: [TowerTalk] More Rohn

To: TowerTalk <towertalk@contesting.com>
Subject: Re: [TowerTalk] More Rohn
From: RICHARD SOLOMON <w1ksz@q.com>
Reply-to: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Date: Thu, 14 Jan 2010 16:51:31 +0000
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Somewhere on my HD I have a copy of a page from an earlier Rohn Catalog
showing the maximum permissable unguyed height vs windload. Then the
Accountants and Lawyers got in the act.
If I find it I will make it available.

73, Dick, W1KSZ

> From: infomet@embarqmail.com
> To: towertalk@contesting.com
> Date: Thu, 14 Jan 2010 07:43:42 -0500
> Subject: [TowerTalk] More Rohn
> 
> Trying again on this post...
> 
> Well, I have enjoyed studying all the thoughtful replies to my questions
> about 25G and its installation.  Thanks.
> Funny thing, though.  I don't KNOW any more than before.
> Some people don't go above a guypoint at all.  They install temporaries on
> every section when it goes up.
> Other people routinely work 20-30 feet above the last guys!
> I got a pretty good windload analysis from a vendor site, covering BX tower,
> but nothing on 25G loading.
> Rohn says 25G is not self supportiing, at all, but I have in my hand a
> drawing of a Rohn "Self Supporting Base Plate"!!
> 
> SO, keep 'em coming.  I'm sifting all the data to decide what I want to do.
> It's obvious that 25G is a strong tower that can do way more than they say.
> I'm not trying to cut corners and be unsafe, but would like to know the real
> structural responses in a real tower.  Maybe I should use some of my
> considerable experience with strain gages!
> 
> What I really want, of course is a spreadsheet or drawing giving windload,
> bending, and shear at all points on a 70' stick of 25G!  Who knows, I may
> have to buckle down and do it myself.
> 
> Does anyone have experience with Blaw Knox?  A friend has 60' standing up in
> his yard for me to take if I want it.  It's VERY heavy, 2-3 times 25G
> although about the same size as 25G.  The joints are plates with several
> bolts at each leg, not telescoping like Rohn.  I know it's at least 50 yr
> old, and probably a good bit more!
> 
> This message has been scanned for netiquette problems.
> 73,
> Wilson
> W4BOH
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
                                          
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>