Towertalk
[Top] [All Lists]

Re: [TowerTalk] Rotor cable protection

To: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Subject: Re: [TowerTalk] Rotor cable protection
From: "Bob Good" <k4bg@planters.net>
Reply-to: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Date: Thu, 11 Mar 2010 19:22:07 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Jim,  I use a trailer connector on mine inside a plastic box for weather 
located just outside the shack window.  73,  Bob K4BG

--------------------------------------------------
From: "Jim Miller" <jim@jtmiller.com>
Sent: Thursday, March 11, 2010 19:03
To: <TowerTalk@contesting.com>
Subject: [TowerTalk] Rotor cable protection

> I've seen lots of advice on grounding and protection of antenna signal 
> leads
> but little on what to do with the rotor cable. It seems that since it is
> elevated and remote it is likely subject to similar pickup issues.
>
> Or am I missing something?
>
> I'm assuming I should bring it through the same service entrance location 
> as
> the coax. What to do about protection etc?
>
> 73
>
> jim ab3cv
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>