These have been available for years from RadioWorks, and were even stocked by
HomeDepot last year for less than $4.00 each. Not sure if they still stock
them now.
73,
Henry - K4TMC
-----Original Message-----
From: Dick Dievendorff <dieven@comcast.net>
To: 'Jim Miller' <jim@jtmiller.com>; TowerTalk@contesting.com
Sent: Tue, May 4, 2010 12:57 pm
Subject: Re: [TowerTalk] Rope Guy Adjusters?
I have no experience with these, but I just saw them and they looked
interesting enough to try.
http://hamcall.net/linegrip.htm
I'm planning on putting the rotator at the bottom of the mast, mounted on a
4"x4" post.
Dick, K6KR
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Jim Miller
Sent: Tuesday, May 04, 2010 9:50 AM
To: TowerTalk@contesting.com
Subject: [TowerTalk] Rope Guy Adjusters?
What sort of adjusters would be recommended for dacron rope guys for a 30ft
mast supporting a lowend rotor and hexbeam?
It will be guyed at 10ft and 30ft with four guys each.
tnx
jim ab3cv
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|