Ken,
In the Plot window use "Save Trace as" to save the first trace; then
plot the second antenna; then use "Add trace" to recall the saved file.
EZNEC will overlay them on the same scale so that they can be directly
compared.
73,
Steve G3TXQ
On 12/11/2010 05:18, Ken Brown wrote:
> Hi all,
>
> I am trying to illustrate a comparison of low angle radiation from
> horizontal antennas at low elevations versus vertical ground plane
> antennas. The only antenna modeling program I have is EZNEC 3.0. I can
> generate nice plots with it, but EZNEC automatically scales the plot so
> that the outer circle is equal to the strongest part of the pattern. I
> would like the two antennas I am comparing to have the same scale, so
> that when the two plots are overlaid the gain can be compared
> graphically, directly, without having to look at the "Outer Ring x.xx
> dBi" Is there a way to do this with EZNEC.
>
> Thanks for any help.
>
> DE N6KB
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|