Towertalk
[Top] [All Lists]

Re: [TowerTalk] 80/40 coax trap dipole design

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] 80/40 coax trap dipole design
From: "DJ7WW" <dj7ww@t-online.de>
Date: Wed, 15 Dec 2010 15:21:04 +0100
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
It will not work on two bands without a trap

73
Peter

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Jim Thomson

Barry's designs use a loading coil in each leg rather than a trap, and 
the coils are roughly at the point where the insulator would be for a 
half wave on the higher band. Then the coils, and a bit more wire.  The 
160/80 version is roughly 160 ft long, the 80/40 version is a bit under 
100 ft. 


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>