Towertalk Mailing List (date)

Towertalk Mailing List (date)

[Thread Index] [Top] [All Lists]

December 31, 2010

Re: [TowerTalk] Recommended Coaxial Surge Protector for HF, Rik van Riel, 18:24
Re: [TowerTalk] Recommended Coaxial Surge Protector for HF, Doug Rehman, 16:31
Re: [TowerTalk] Recommended Coaxial Surge Protector for HF, Alan NV8A, 15:24
Re: [TowerTalk] Recommended Coaxial Surge Protector for HF, Alan NV8A, 14:51
[TowerTalk] HDX-89 rotator replacement - w/o tilting the tower over?, Mike, 13:10
[TowerTalk] Recommended Coaxial Surge Protector for HF, Bill Jackson, 12:48
Re: [TowerTalk] Non-sagging antenna elements, Jim Hargrave, 12:39
Re: [TowerTalk] HDX-89 rotator replacement - w/o tilting the tower over?, K7LXC, 12:17
Re: [TowerTalk] 1/4w matching, Common mode chokes and BAL-UN, Steve Hunt, 12:06
Re: [TowerTalk] Gigavac Relays, Richard (Rick) Karlquist, 11:39
Re: [TowerTalk] Non-sagging antenna elements, N6FD, 10:56
Re: [TowerTalk] Fwd: Using aluminum wire [or aluminum clad wire], Rik van Riel, 10:56
Re: [TowerTalk] Non-sagging antenna elements, Tod - ID, 10:25
Re: [TowerTalk] Gigavac Relays, Tod - ID, 10:21
Re: [TowerTalk] Non-sagging antenna elements, N6FD, 10:17
[TowerTalk] Fwd: Using aluminum wire [or aluminum clad], Jim Thomson, 08:29
Re: [TowerTalk] Gigavac Relays, Jim Thomson, 08:10
Re: [TowerTalk] HDX-89 rotator replacement - w/o tilting the tower over?, k6ye, 07:27
[TowerTalk] 1/4w matching, Common mode chokes and BAL-UN, Jim Thomson, 07:12
[TowerTalk] Crimp tool for cable ends, Jim Thomson, 06:54
Re: [TowerTalk] HDX-89 rotator replacement - w/o tilting the tower over?, Gary E. Jones, 06:26
Re: [TowerTalk] Aluminum clad wire, Joel Harrison, 04:10
Re: [TowerTalk] ground rod spacing, Roger (K8RI), 03:41
Re: [TowerTalk] Aluminum clad wire, Roger (K8RI), 01:17
Re: [TowerTalk] Fwd: Using aluminum wire [or aluminum clad wire], Roger (K8RI), 01:14

December 30, 2010

Re: [TowerTalk] Aluminum clad wire, WA2PUQ, 19:15
Re: [TowerTalk] Using aluminum wire (or aluminum clad) - for buried radials?, n8de, 17:30
Re: [TowerTalk] Ground Rods Question, Gene Smar, 17:06
Re: [TowerTalk] Using aluminum wire (or aluminum clad) - for buried radials?, Clint Talmadge W5CPT, 16:53
[TowerTalk] Using aluminum wire (or aluminum clad) - for buried radials?, Peter Sils, 16:46
Re: [TowerTalk] Ground Rods Question, Mike, 16:03
Re: [TowerTalk] Ground Rods Question, Dave Cole, 15:19
Re: [TowerTalk] ground rod spacing, Larry, 15:19
Re: [TowerTalk] HDX-89 rotator replacement - w/o tilting the tower over?, Bill NY9H, 15:11
Re: [TowerTalk] ground rod spacing, Jim W7RY, 15:11
Re: [TowerTalk] Ground Rods Question, Jim W7RY, 15:11
Re: [TowerTalk] Fwd: Using aluminum wire [or aluminum clad wire], Tod - ID, 13:23
Re: [TowerTalk] Fwd: Using aluminum wire [or aluminum clad wire], Rik van Riel, 13:08
Re: [TowerTalk] Fwd: Using aluminum wire [or aluminum clad wire], Pete Smith, 13:08
Re: [TowerTalk] Fwd: Using aluminum wire [or aluminum clad wire], Tod - ID, 13:02
Re: [TowerTalk] Fwd: Using aluminum wire [or aluminum clad wire], Kevin Normoyle, 12:51
[TowerTalk] Fwd: Using aluminum wire [or aluminum clad wire], Hans Hammarquist, 12:29
Re: [TowerTalk] Ground Rods Question, n4zkf, 12:06
Re: [TowerTalk] ground rod spacing, Jim Brown, 11:41
Re: [TowerTalk] Aluminum clad wire, Robert Harmon, 10:52
Re: [TowerTalk] Aluminum clad wire, Grant Saviers, 10:48
Re: [TowerTalk] ground rod spacing, Dave Cole, 10:40
Re: [TowerTalk] ground rod spacing, Larry, 10:20
Re: [TowerTalk] HDX-89 rotator replacement - w/o tilting the tower over?, K7LXC, 09:50
Re: [TowerTalk] Aluminum clad wire, Jim Wright, 09:47
Re: [TowerTalk] Aluminum clad wire, Robert Harmon, 09:32
Re: [TowerTalk] HDX-89 rotator replacement - w/o tilting the tower over?, john@kk9a.com, 09:22
Re: [TowerTalk] Aluminum clad wire, Rik van Riel, 09:04
Re: [TowerTalk] Non-sagging antenna elements, Rik van Riel, 09:03
[TowerTalk] Using aluminum wire, Tod - ID, 08:46
[TowerTalk] Using aluminum wire, Tod - ID, 08:43
[TowerTalk] Using aluminum wire [or aluminum clad wire], Tod - ID, 08:40
[TowerTalk] ground rod spacing, Jim Hoge, 08:36
[TowerTalk] Non-sagging antenna elements, Tod - ID, 08:25
[TowerTalk] Using aluminum wire [or aluminum clad wire], Tod - ID, 08:25
Re: [TowerTalk] Aluminum clad wire, n8de, 08:21
Re: [TowerTalk] Gigavac Relays, Richard (Rick) Karlquist, 08:16
Re: [TowerTalk] HDX-89 rotator replacement - w/o tilting the tower over?, Les Kalmus, 08:14
[TowerTalk] Fwd: Aluminum clad wire, Hans Hammarquist, 08:10
Re: [TowerTalk] Aluminum clad wire, Roger (K8RI), 08:02
[TowerTalk] Al wire, Howard Hoyt, 07:59
Re: [TowerTalk] Aluminum clad wire, Roger (K8RI), 07:57
Re: [TowerTalk] Ground Rods Question, Dave Cole, 07:52
Re: [TowerTalk] Aluminum clad wire, R. Morris, 07:40
[TowerTalk] Al Wire, Wilson Lamb, 07:30
Re: [TowerTalk] HDX-89 rotator replacement - w/o tilting the tower over?, Brian Moran, 07:28
Re: [TowerTalk] Ground Rods Question, Clint Talmadge W5CPT, 07:20
Re: [TowerTalk] Aluminum clad wire, Robert Harmon, 07:17
Re: [TowerTalk] Length of Sloper?, john@kk9a.com, 07:07
Re: [TowerTalk] Ground Rods Question, n4zkf, 06:59
Re: [TowerTalk] Ground Rods Question, K1TTT, 06:49
[TowerTalk] Ground Rods Question, Dave Cole, 06:38
Re: [TowerTalk] HDX-89 rotator replacement - w/o tilting the tower over?, K7LXC, 06:21
Re: [TowerTalk] Length of Sloper?, Gene Smar, 06:03
Re: [TowerTalk] Aluminum clad wire, Jack, 05:34
Re: [TowerTalk] 1/4w matching, Common mode chokes and BAL-UN, Bob Alexander, 05:12

December 29, 2010

Re: [TowerTalk] Aluminum clad wire, Roger (K8RI), 23:32
[TowerTalk] Aluminum clad wire, Grant Saviers, 23:14
Re: [TowerTalk] HDX-89 rotator replacement - w/o tilting the tower over?, N7US, 20:53
Re: [TowerTalk] 1/4w matching, Common mode chokes and BAL-UN, Jim Brown, 20:52
Re: [TowerTalk] HDX-89 rotator replacement - w/o tilting the tower over?, John Ammeter, 20:39
[TowerTalk] HDX-89 rotator replacement - w/o tilting the tower over?, Brian Moran, 20:28
Re: [TowerTalk] Crimp tool for cable ends, Roger (K8RI), 19:37
[TowerTalk] 1/4w matching, Common mode chokes and BAL-UN, NPAlex, 19:36
Re: [TowerTalk] Length of Sloper?, Roger (K8RI), 19:26
Re: [TowerTalk] Crimp tool for cable ends, Dan Evans, 18:04
Re: [TowerTalk] Length of Sloper?, Larry, 17:39
Re: [TowerTalk] Length of Sloper?, GREG FICHER, 17:10
Re: [TowerTalk] Length of Sloper?, Stan Stockton, 16:35
[TowerTalk] Length of Sloper?, RLVZ, 15:59
Re: [TowerTalk] 160M Inverted L Elev Radials EZNEC Model Wanted, Rik van Riel, 15:48
[TowerTalk] Splicing Aluminum Wire, Michael Tope, 15:46
Re: [TowerTalk] 160M Inverted L Elev Radials EZNEC Model Wanted, Les Kalmus, 14:58
Re: [TowerTalk] 160M Inverted L Elev Radials EZNEC Model Wanted, Clint Talmadge W5CPT, 14:44
Re: [TowerTalk] 160M Inverted L Elev Radials EZNEC Model Wanted, Rik van Riel, 14:19
[TowerTalk] 160M Inverted L Elev Radials EZNEC Model Wanted, Paul Ferguson, 10:25
Re: [TowerTalk] 1/4 wave coax "Balun"?, DJ7WW, 07:34
Re: [TowerTalk] 1/4 wave coax "Balun"?, TexasRF, 06:13
Re: [TowerTalk] Crimp tool for cable ends, Larry stowell, 05:58
Re: [TowerTalk] 1/4 wave coax "Balun"?, Bob Alexander, 04:00
Re: [TowerTalk] Crimp tool for cable ends, Mike, 03:57
Re: [TowerTalk] Baluns...again., Roger (K8RI), 03:26
[TowerTalk] 1/4 wave coax "Balun"?, Norman Alexander, 02:32
[TowerTalk] 160m vertical feed point impedance?, John, 02:31

December 28, 2010

Re: [TowerTalk] Crimp tool for cable ends, Paul Christensen, 19:58
Re: [TowerTalk] Crimp tool for cable ends, Roger (K8RI), 19:04
Re: [TowerTalk] Crimp tool for cable ends, Roger (K8RI), 18:59
[TowerTalk] Crimp tool for cable ends, Dan Evans, 16:52
Re: [TowerTalk] Waller flag, Robert Harmon, 09:48
Re: [TowerTalk] Fw: [WISPA Members] Can anyone identify this typeof tower?, Marlon K. Schafer, 09:38
[TowerTalk] Waller flag, Mike, 09:36
Re: [TowerTalk] Baluns...again., Steve Hunt, 09:08
Re: [TowerTalk] Baluns...again., Stan Stockton, 08:04
[TowerTalk] Baluns...again., Jim Thomson, 07:04

December 27, 2010

Re: [TowerTalk] Gigavac Relays, Tod Olson, 07:49
[TowerTalk] Gigavac Relays, Jim Thomson, 03:43

December 26, 2010

Re: [TowerTalk] Gigavac Relays, Richard (Rick) Karlquist, 03:58
Re: [TowerTalk] Gigavac Relays, Rich Hallman - N7TR, 03:58
Re: [TowerTalk] Gigavac Relays, Jim W7RY, 03:58
Re: [TowerTalk] Gigavac Relays, Jim Brown, 03:58

December 25, 2010

[TowerTalk] Gigavac Relays, Howard Hoyt, 11:02

December 24, 2010

[TowerTalk] AR-22 rotor calibration, mikflathead, 12:01
[TowerTalk] Rope, Robert Chudek - K0RC, 12:01
Re: [TowerTalk] After Christmas discount a bit early!, GALE STEWARD, 12:01
Re: [TowerTalk] NAQP CW + Skimmer, john, 08:25

December 23, 2010

Re: [TowerTalk] [CQ-Contest] NAQP CW + Skimmer, Kevin Normoyle, 20:01
Re: [TowerTalk] Tailtwister T2X Rotator/Mast Mount, David Thompson, 19:57
Re: [TowerTalk] [CQ-Contest] NAQP CW + Skimmer, Jim Brown, 19:54
Re: [TowerTalk] [CQ-Contest] NAQP CW + Skimmer, Kevin Normoyle, 19:27
Re: [TowerTalk] [CQ-Contest] NAQP CW + Skimmer, Joe Subich, W4TV, 18:17
Re: [TowerTalk] [CQ-Contest] NAQP CW + Skimmer, Roger (K8RI), 17:33
Re: [TowerTalk] [CQ-Contest] NAQP CW + Skimmer, Roger (K8RI), 17:26
Re: [TowerTalk] [CQ-Contest] NAQP CW + Skimmer, R. Morris, 17:24
[TowerTalk] Tailtwister T2X Rotator/Mast Mount, Ed G, 17:22
Re: [TowerTalk] [CQ-Contest] NAQP CW + Skimmer, Roger (K8RI), 17:20
Re: [TowerTalk] [CQ-Contest] NAQP CW + Skimmer, Dennis OConnor, 16:18
[TowerTalk] After Christmas discount a bit early!, K1TTT, 16:17
Re: [TowerTalk] [CQ-Contest] NAQP CW + Skimmer, David Blake, 14:54
Re: [TowerTalk] [CQ-Contest] NAQP CW + Skimmer, Jim Brown, 09:51
Re: [TowerTalk] [CQ-Contest] NAQP CW + Skimmer, Dave Hachadorian, 09:26
Re: [TowerTalk] ARRL Antenna Compendium Vol. 8 question, Jim Brown, 08:54
Re: [TowerTalk] vertical performance, Jim Brown, 08:48
[TowerTalk] RF current in REF + DIR ..how much ?, Jim Thomson, 08:17
Re: [TowerTalk] ARRL Antenna Compendium Vol. 8 question, Al Williams, 07:40
[TowerTalk] ARRL Antenna Compendium Vol. 8 question, k4tmc, 05:21

December 22, 2010

Re: [TowerTalk] RF current in REF + DIR ..how much ?, N6FD, 19:47
[TowerTalk] vertical performance, David, 19:35
Re: [TowerTalk] RF current in REF + DIR ..how much ?, Kevin Normoyle, 18:28
Re: [TowerTalk] RF current in REF + DIR ..how much ?, Al Williams, 17:46
[TowerTalk] TMM-433 HD upper limit switch photo request, Victor Morris, 15:31
Re: [TowerTalk] Using Belden 9913F7 Vs. LMR-400UF : An Alternative.Input by DAVIS RF Co, Stephen Davis, 10:53
[TowerTalk] Using Belden 9913F7 Vs. LMR-400UF : An Alternative. Input by DAVIS RF Co, Stephen Davis, 10:20
Re: [TowerTalk] RF current in REF + DIR ..how much ?, David Robbins, 07:41
[TowerTalk] RF current in REF + DIR ..how much ?, Dennis OConnor, 07:21
Re: [TowerTalk] Fw: [WISPA Members] Can anyone identify this type of tower?, n8de, 06:16
[TowerTalk] RF current in REF + DIR ..how much ?, Jim Thomson, 06:15
[TowerTalk] Fw: [WISPA Members] Can anyone identify this type of tower?, Marlon K. Schafer, 05:30

December 21, 2010

Re: [TowerTalk] TowerTalk Digest, Vol 96, Issue 48, Wilson Lamb, 12:21
Re: [TowerTalk] Ideas for SMALL diameter support "rope"..., Ed K0KL, 03:08

December 20, 2010

[TowerTalk] Fwd: Ideas for SMALL diameter support "rope"..., Hans Hammarquist, 11:06
Re: [TowerTalk] Ideas for SMALL diameter support "rope"..., Richard Solomon, 10:17
Re: [TowerTalk] Ideas for SMALL diameter support "rope"..., Jim Hargrave, 09:59
[TowerTalk] WA PE needed, K7LXC, 09:37
Re: [TowerTalk] Ideas for SMALL diameter support "rope"..., Cqtestk4xs, 07:18
Re: [TowerTalk] U.S. Tower MDP-750 motor failure and related prolems, Les Kalmus, 06:13
[TowerTalk] Stacking a 402CD over a Steppir, Roger Cooke, 00:45

December 19, 2010

[TowerTalk] Rotor box problem, Tom Osborne, 22:33
Re: [TowerTalk] Ideas for SMALL diameter support "rope"..., Dan Zimmerman N3OX, 20:43
Re: [TowerTalk] U.S. Tower MDP-750 motor failure and related prolems, Richard (Rick) Karlquist, 20:33
Re: [TowerTalk] U.S. Tower MDP-750 motor failure and related prolems, Alan NV8A, 20:15
[TowerTalk] U.S. Tower MDP-750 motor failure and related prolems, Victor Morris, 19:52
Re: [TowerTalk] Ideas for SMALL diameter support "rope"..., Gene Smar, 19:21
Re: [TowerTalk] Ideas for SMALL diameter support "rope"..., Michael Goins, 19:14
Re: [TowerTalk] Ideas for SMALL diameter support "rope"..., Mike, 18:51
Re: [TowerTalk] Ideas for SMALL diameter support "rope"..., Barrie Smith, 18:45
Re: [TowerTalk] Ideas for SMALL diameter support "rope"..., Mike, 18:39
Re: [TowerTalk] Ideas for SMALL diameter support "rope"..., Michael Goins, 18:35
Re: [TowerTalk] Ideas for SMALL diameter support "rope"..., Robert Harmon, 18:25
Re: [TowerTalk] Ideas for SMALL diameter support "rope"..., Hector Garcia XE2K, 15:58
Re: [TowerTalk] Ideas for SMALL diameter support "rope"..., Chuck, 15:35
[TowerTalk] Ideas for SMALL diameter support "rope"..., John, 14:57

December 17, 2010

Re: [TowerTalk] RBX-40 by E-Z Way, Harry Brown, 14:17
Re: [TowerTalk] [Antenna-discussion] Fractal Antennas, Chip Cohen (N1IR) on Nova Last Night, Pete Smith, 13:58
Re: [TowerTalk] [Antenna-discussion] Fractal Antennas, Chip Cohen (N1IR) on Nova Last Night, jimlux, 13:09
Re: [TowerTalk] Fractal Antennas, Chip Cohen (N1IR) on Nova, jimlux, 09:21
Re: [TowerTalk] Fractal Antennas, Chip Cohen (N1IR) on Nova, Steve Katz, 08:44
Re: [TowerTalk] 80/40 coax trap dipole design, jimlux, 08:00
Re: [TowerTalk] 80/40 coax trap dipole design, jimlux, 07:52
Re: [TowerTalk] 80/40 coax trap dipole design, Dan Zimmerman N3OX, 07:36
Re: [TowerTalk] Fractal Antennas, Chip Cohen (N1IR) on Nova, jimlux, 06:13
Re: [TowerTalk] Rebuilding traps on Cushcraft ATB-34, Tony Brock-Fisher, 05:34
Re: [TowerTalk] 80/40 coax trap dipole design, Ian White GM3SEK, 05:28
Re: [TowerTalk] Rebuilding traps on Cushcraft ATB-34, Jim W7RY, 04:24
Re: [TowerTalk] 80/40 coax trap dipole design, DJ7WW, 04:24
Re: [TowerTalk] 80/40 coax trap dipole design, DJ7WW, 04:24
Re: [TowerTalk] Handy bit of info, Jim W7RY, 04:24
Re: [TowerTalk] 80/40 coax trap dipole design, DJ7WW, 04:24
Re: [TowerTalk] Fractal Antennas, Chip Cohen (N1IR) on Nova, Tom Dawson, 04:23

December 16, 2010

Re: [TowerTalk] Fractal Antennas, Chip Cohen (N1IR) on Nova Last Night, jimlux, 21:20
Re: [TowerTalk] 80/40 coax trap dipole design, Jim Brown, 20:38
[TowerTalk] RBX-40 by E-Z Way, Tower Su, 18:23
Re: [TowerTalk] Moxon questions, TexasRF, 18:06
[TowerTalk] wanted: uhf satellite antenna. 3-6 elements, normn3ykf, 14:57
[TowerTalk] Rebuilding traps on Cushcraft ATB-34, W7RIS - ARRL, 12:00
[TowerTalk] OT Handy bit of info, Roger (K8RI), 11:00
Re: [TowerTalk] Moxon questions, knormoyle@surfnetusa.com, 10:35
Re: [TowerTalk] 80/40 coax trap dipole design, Jim Brown, 09:55
Re: [TowerTalk] Handy bit of info, Tommy Alderman, 09:45
[TowerTalk] Moxon questions, r miles, 09:28
Re: [TowerTalk] 80/40 coax trap dipole design, Rik van Riel, 09:00
Re: [TowerTalk] 80/40 coax trap dipole design, Rik van Riel, 08:54
[TowerTalk] USt TX-472 and Fulton K2550 Winch, Dan Bookwalter, 08:05
[TowerTalk] Replacing the LL in 340N ele's with coils, Jim Thomson, 07:11
Re: [TowerTalk] 80/40 coax trap dipole design, TexasRF, 06:37
[TowerTalk] Handy bit of info, Its from KE4VYN, 06:08
Re: [TowerTalk] [Antenna-discussion] Fractal Antennas, Chip Cohen (N1IR) on Nova Last Night, David Jefferies, 06:08
Re: [TowerTalk] 80/40 coax trap dipole design, DJ7WW, 06:08
Re: [TowerTalk] Fractal Antennas, Chip Cohen (N1IR) on Nova, jimlux, 06:05
Re: [TowerTalk] Fractal Antennas, Chip Cohen (N1IR) on Nova, jimlux, 05:56
Re: [TowerTalk] Fractal Antennas, Chip Cohen (N1IR, Charles Coldwell, 03:36
Re: [TowerTalk] Fractal Antennas, Chip Cohen (N1IR) on Nova, David Gilbert, 00:11

December 15, 2010

[TowerTalk] Fractal Antennas, Chip Cohen (N1IR) on Nova, Jim Thomson, 23:36
[TowerTalk] Fractal Antennas, Chip Cohen (N1IR, Jim Thomson, 23:19
Re: [TowerTalk] Fractal Antennas, Chip Cohen (N1IR) on Nova Last Night, Dave AA6YQ, 22:36
Re: [TowerTalk] Fractal Antennas, Chip Cohen (N1IR) on Nova Last Night, Roger (K8RI), 22:15
Re: [TowerTalk] Fractal Antennas, Chip Cohen (N1IR) on Nova Last Night, Andy, 22:15
Re: [TowerTalk] Fractal Antennas, Chip Cohen (N1IR) on Nova Last Night, jimlux, 20:45
[TowerTalk] 80/160 ANTENNA IS SHORT, Dan Hearn, 20:32
[TowerTalk] looking for Wilson tower foundation info, Rob Salsgiver, 19:23
Re: [TowerTalk] Fractal Antennas, Chip Cohen (N1IR) on Nova Last Night, Rik van Riel, 19:20
Re: [TowerTalk] Fractal Antennas, Chip Cohen (N1IR) on Nova Last Night, jimlux, 19:03
Re: [TowerTalk] Fractal Antennas, Chip Cohen (N1IR) on Nova Last Night, jimlux, 18:59
Re: [TowerTalk] Fractal Antennas, Chip Cohen (N1IR) on Nova Last Night, Joe Subich, W4TV, 18:41
[TowerTalk] 80/160 ANTENNA IS SHORT, Dennis OConnor, 18:25
[TowerTalk] Fractal Antennas, Chip Cohen (N1IR) on Nova Last Night, Dennis OConnor, 18:01
Re: [TowerTalk] Fractal Antennas, Chip Cohen (N1IR) on Nova Last Night, Rick Karlquist, 17:28
Re: [TowerTalk] Fractal Antennas, Chip Cohen (N1IR) on Nova Last Night, Roger (K8RI), 16:35
Re: [TowerTalk] 80/40 coax trap dipole design, Joe Subich, W4TV, 14:00
Re: [TowerTalk] 80/40 coax trap dipole design, Joe Subich, W4TV, 13:51
Re: [TowerTalk] 80/40 coax trap dipole design, Rik van Riel, 13:42
Re: [TowerTalk] 80/40 coax trap dipole design, Tod - ID, 13:41
Re: [TowerTalk] 80/40 coax trap dipole design, Jim Brown, 13:09
Re: [TowerTalk] 80/40 coax trap dipole design, Jim Brown, 13:05
[TowerTalk] Fractal Antennas, Chip Cohen (N1IR, Craig Clark, 12:41
Re: [TowerTalk] 80/40 coax trap dipole design, Dan Zimmerman N3OX, 12:32
Re: [TowerTalk] Fractal Antennas, Chip Cohen (N1IR) on Nova Last Night, Andy, 10:12
[TowerTalk] Fractal Antennas, Chip Cohen (N1IR) on Nova Last Night, Joe Giacobello, K2XX, 08:39
[TowerTalk] 80/40 coax trap dipole design, Jim Thomson, 06:15
Re: [TowerTalk] 80/40 coax trap dipole design, Alan Fryer, 04:50

December 14, 2010

Re: [TowerTalk] 80/40 coax trap dipole design, Jim Brown, 19:56
Re: [TowerTalk] 80/40 coax trap dipole design, Tod - ID, 19:27
[TowerTalk] 80/40 coax trap dipole design, WW3S, 18:36
Re: [TowerTalk] 80/160 ANTENNA IS SHORT, N7mal, 16:38
Re: [TowerTalk] 80/160 ANTENNA IS SHORT, Paul Sturpe, 15:55

December 13, 2010

Re: [TowerTalk] 160m Shunt Feed (Kelley), David Thompson, 18:14
Re: [TowerTalk] 160m Shunt Feed, Marc Wullaert ON4MA, 10:37
[TowerTalk] 160m Shunt Feed (Kelley), Craig Clark, 05:48

December 12, 2010

Re: [TowerTalk] 205BA vs 205CA, Dino Darling, 07:29
Re: [TowerTalk] 160m Shunt Feed, Stan Stockton, 04:01

December 11, 2010

Re: [TowerTalk] 160m Shunt Feed, Gene Smar, 17:49
[TowerTalk] 160m Shunt Feed, Kelley, 15:57
Re: [TowerTalk] 205BA vs 205CA, Tom Haavisto, 12:11
Re: [TowerTalk] Stacking a 402CD over a Steppir, Dick Green WC1M, 11:46
[TowerTalk] 205BA vs 205CA, Neil Sheldon, 07:44

December 10, 2010

[TowerTalk] Need modeling help: Tower and yagi(s) in centre of Four Square, Barry Kirkwood, 16:50
Re: [TowerTalk] Stacking a 402CD over a Steppir (Barney Scholl), Barney Scholl, 15:16
Re: [TowerTalk] Reusing Coax, n8de, 15:01
[TowerTalk] Reusing Coax, Roger (K8RI), 14:21
[TowerTalk] Stacking a 402CD over a Steppir, Roger Cooke, 11:03
Re: [TowerTalk] How Plumb does a tower need to be, Alan Swinger, 10:25
[TowerTalk] How Plumb does a tower need to be, Dan Bookwalter, 10:16
Re: [TowerTalk] Four Square Array: effect of placing tower with yagi etc in c..., Dan Hearn, 09:19
Re: [TowerTalk] Four Square Array: effect of placing tower with yagi etc in centre of four square, jimlux, 06:00
Re: [TowerTalk] Four Square Array: effect of placing tower with yagi etc in c..., TexasRF, 04:32
[TowerTalk] Four Square Array: effect of placing tower with yagi etc in centre of four square, Barry Kirkwood, 04:08

December 08, 2010

[TowerTalk] Fw: Welll...Sh...Shucks., Sam Andrews, 17:28
Re: [TowerTalk] Noise puzzle (longish), Pete F5VNB, 16:03
Re: [TowerTalk] Welll...Sh...Shucks., Roger (K8RI), 15:24
Re: [TowerTalk] Welll...Sh...Shucks., n8de, 14:50
[TowerTalk] Welll...Sh...Shucks., Roger (K8RI), 14:33
[TowerTalk] Cushcraft Antenna Traps, Elliott Lawrence, 10:38
Re: [TowerTalk] Bendix Synchro Set, Jim Brown, 10:22
Re: [TowerTalk] Noise puzzle (longish), David Gilbert, 09:44
[TowerTalk] Fw: who's "right" (a tuner question), Rob Atkinson, 09:26
[TowerTalk] Rohn 25 Sections for Sale, J.Gordon Beattie, Jr., W2TTT, 08:46
Re: [TowerTalk] Noise puzzle (longish), Pete F5VNB, 08:37
Re: [TowerTalk] wire yagis for the top band vs phased 26.5 m verticals, jimlux, 07:52
Re: [TowerTalk] Noise puzzle (longish), Bill, 07:46
[TowerTalk] wire yagis for the top band vs phased 26.5 m verticals, Dennis OConnor, 07:46
Re: [TowerTalk] Noise puzzle (longish), Mike, 07:44
Re: [TowerTalk] Noise puzzle (longish), David Robbins, 07:33
[TowerTalk] Noise puzzle (longish), Pete F5VNB, 07:13
Re: [TowerTalk] Never before asked question, n4zkf, 06:20
Re: [TowerTalk] Never before asked question, K7LXC, 04:45
[TowerTalk] Never before asked question, Jim Thomson, 02:59
Re: [TowerTalk] Never before asked question, n8de, 02:27
[TowerTalk] W6PU Dual driven quad, Martin Sole, 02:00

December 07, 2010

Re: [TowerTalk] Protecting fibreglass spreaders, Roger (K8RI), 23:06
Re: [TowerTalk] Protecting fibreglass spreaders, Martin Sole, 21:50
Re: [TowerTalk] Never before asked question, Dave, 21:15
Re: [TowerTalk] Never before asked question, Roger (K8RI), 20:36
Re: [TowerTalk] Never-Seez and noalox?, Roger (K8RI), 20:30
[TowerTalk] Dayton Hamvention Antenna Forum - May 2011, Tim Duffy K3LR, 20:10
Re: [TowerTalk] Never before asked question, Mike & Becca Krzystyniak, 19:57
Re: [TowerTalk] wire yagis for the top band vs phased 26.5 m verticals, Rik van Riel, 19:56
Re: [TowerTalk] Never before asked question, Clay W7CE, 19:44
[TowerTalk] wire yagis for the top band vs phased 26.5 m verticals, Chris Wagner, 19:31
[TowerTalk] Never before asked question, Mike, 19:29
Re: [TowerTalk] Never before asked question, Kevin Adam, 19:25
Re: [TowerTalk] Never before asked question, Neil & Heather, 19:20
Re: [TowerTalk] Never before asked question, Michael Baker, 19:13
[TowerTalk] Sticking, Warrenwolff, 19:04
Re: [TowerTalk] Never before asked question, Robie Elms, 19:04
Re: [TowerTalk] Never before asked question, Gene Smar, 19:02
Re: [TowerTalk] Never before asked question, Robert Harmon, 19:00
Re: [TowerTalk] Never before asked question, Wes Attaway \(N5WA\), 18:47
Re: [TowerTalk] Never before asked question, Jim Rhodes, 18:42
Re: [TowerTalk] Never before asked question, TexasRF, 18:42
[TowerTalk] Never before asked question, K7LXC, 18:26
[TowerTalk] Bendix Synchro Set, Dean Runk, 18:06
Re: [TowerTalk] who's "right" (a tuner question), jim feldman, 17:23
[TowerTalk] Fw: who's "right" (a tuner question), Jim Thomson, 17:04
Re: [TowerTalk] Never-Seez and noalox?, john, 17:01
[TowerTalk] SVHFS 2011 Conference Call For Papers, Robin Midgett, 16:50
[TowerTalk] Fw: Fw: who's "right" (a tuner question), Sam Andrews, 11:16
Re: [TowerTalk] who's "right" (a tuner question),, Rob Atkinson, 10:57
Re: [TowerTalk] Fw: who's "right" (a tuner question), Kevin Normoyle, 09:48
[TowerTalk] Fw: who's "right" (a tuner question), Sam Andrews, 08:29
Re: [TowerTalk] who's "right" (a tuner question), Mark Robinson, 06:25
[TowerTalk] Using Ring Rotors on crank up towers, Jim Thomson, 06:12
[TowerTalk] Using Ring Rotors on crank up towers, Mike & Becca Krzystyniak, 05:53
Re: [TowerTalk] Protecting fibreglass spreaders, Daryll Webb, 05:33
[TowerTalk] Never-Seez and noalox?, Jim Thomson, 04:43

December 06, 2010

Re: [TowerTalk] who's "right" (a tuner question), jim feldman, 23:45
Re: [TowerTalk] who's "right" (a tuner question), jim feldman, 17:09
[TowerTalk] penetrox and copper cote, W5JMW, 16:06
Re: [TowerTalk] Protecting fibreglass spreaders, Roger (K8RI), 15:04
Re: [TowerTalk] who's "right" (a tuner question), knormoyle@surfnetusa.com, 12:07
Re: [TowerTalk] who's "right" (a tuner question), donhall161, 12:05
Re: [TowerTalk] who's "right" (a tuner question), Gene Fuller, 11:45
Re: [TowerTalk] who's "right" (a tuner question), jim feldman, 11:37
Re: [TowerTalk] Never-Seez and noalox?, Roger (K8RI), 11:30
Re: [TowerTalk] Protecting fibreglass spreaders, Roger (K8RI), 11:24
Re: [TowerTalk] Never-Seez and noalox?, Roger (K8RI), 11:21
Re: [TowerTalk] who's "right" (a tuner question), Grant Saviers, 11:18
[TowerTalk] who's "right" (a tuner question), jim feldman, 10:31
Re: [TowerTalk] Protecting fibreglass spreaders, John Tait, 06:44
Re: [TowerTalk] Never-Seez and noalox?, jimlux, 06:33
Re: [TowerTalk] Protecting fibreglass spreaders, Neil Sheldon, 05:01
Re: [TowerTalk] Protecting fibreglass spreaders, Pete Smith, 04:45
Re: [TowerTalk] Protecting fibreglass spreaders, Gary \"Joe\" Mayfield, 04:40
[TowerTalk] Protecting fibreglass spreaders, Martin Sole, 04:03
Re: [TowerTalk] Never-Seez and noalox?, n8de, 03:55

December 05, 2010

Re: [TowerTalk] Never-Seez and noalox?, Roger (K8RI), 21:43
Re: [TowerTalk] Never-Seez and noalox?, jimlux, 21:24
[TowerTalk] Small Prop Pitch water seal, NPAlex, 19:27
Re: [TowerTalk] Never-Seez and noalox?, Roger (K8RI), 17:34
Re: [TowerTalk] Never-Seez and noalox?, n8de, 16:39
[TowerTalk] Never-Seez and noalox?, Roger (K8RI), 16:29
Re: [TowerTalk] PL259 to CATV Hardline, Don Moman VE6JY, 11:46
[TowerTalk] PL259 to CATV Hardline, K8RI on TowerTalk, 11:03
[TowerTalk] 40 meter yagi over a 40 meter dipole, Gary Slagel, 09:13
Re: [TowerTalk] Can capacity hats be installed inboard of a coil or LL ??, David Gilbert, 08:41
Re: [TowerTalk] Can capacity hats be installed inboard of a coil or LL ??, TexasRF, 07:50
[TowerTalk] Can capacity hats be installed inboard of a coil or LL ??, Jim Thomson, 06:51
Re: [TowerTalk] This is about as dangerous as it gets., Charles Coldwell, 04:52
Re: [TowerTalk] This is about as dangerous as it gets., Roger (K8RI), 04:15
[TowerTalk] This is about as dangerous as it gets., Jim Thomson, 04:10
[TowerTalk] Luso crank up tower's...a better mousetrap ?, Jim Thomson, 01:42

December 04, 2010

Re: [TowerTalk] Tower Incident Joke, Roger (K8RI), 11:03
[TowerTalk] Shunt Feeding a Crankup, Dan Bookwalter, 07:08

December 03, 2010

Re: [TowerTalk] 10M groundplane radials, David Gilbert, 18:42
Re: [TowerTalk] Ladder Line Spacing from a Steel Tower, Mike, 18:12
Re: [TowerTalk] 10M groundplane radials, Michael Goins, 18:06
Re: [TowerTalk] 10M groundplane radials, EZ Rhino, 17:45
Re: [TowerTalk] 10M groundplane radials, Ron Bowman, 17:39
Re: [TowerTalk] 10M groundplane radials, n8de, 17:33
[TowerTalk] 10M groundplane radials, Bill and Cindy, 17:30
Re: [TowerTalk] FW: Ground Rods, Jim W7RY, 17:30
Re: [TowerTalk] Breaking all the tower climbing rules at an, Grant Saviers, 16:13
Re: [TowerTalk] Ladder Line Spacing from a Steel Tower, jimlux, 16:09
Re: [TowerTalk] Shippimg, Grant Saviers, 15:55
Re: [TowerTalk] Ladder Line Spacing from a Steel Tower, Al Williams, 15:22
Re: [TowerTalk] Tower Incident Joke, Alan NV8A, 14:50
Re: [TowerTalk] Ladder Line Spacing from a Steel Tower, jimlux, 14:40
Re: [TowerTalk] ladder safety, Tearlach Sinclair, 14:38
Re: [TowerTalk] Ladder Line Spacing from a Steel Tower, Roger (K8RI), 14:33
Re: [TowerTalk] Ladder Line Spacing from a Steel Tower, jimlux, 14:20
Re: [TowerTalk] Ladder Line Spacing from a Steel Tower, n8de, 13:58
[TowerTalk] Ladder Line Spacing from a Steel Tower, W1JCW, 13:49
Re: [TowerTalk] Tower Incident Joke, Nate Bargmann, 13:42
Re: [TowerTalk] Tower Incident Joke, n8de, 13:38
[TowerTalk] Ladder Line Spacing from a Steel Tower, Sam Andrews, 13:20
Re: [TowerTalk] Tower Incident Joke, jimlux, 12:58
Re: [TowerTalk] Tower Incident Joke, Roger (K8RI), 12:02
Re: [TowerTalk] Breaking all the tower climbing rules at an, Roger (K8RI), 11:59
Re: [TowerTalk] Breaking all the tower climbing rules at an, Roger (K8RI), 11:56
Re: [TowerTalk] Tower Incident Joke, Tommy Alderman, 11:49
Re: [TowerTalk] Tower Incident Joke, David Kozinn, K2DBK, 11:21
Re: [TowerTalk] Tower Incident Joke, jimlux, 11:01
Re: [TowerTalk] Tower Incident Joke, David Kozinn, K2DBK, 10:55
Re: [TowerTalk] Tower Incident Joke, Larry stowell, 10:43
Re: [TowerTalk] Tower Incident Joke, Jim Walker, 10:34
Re: [TowerTalk] Falling off ladder's., Robert Harmon, 10:19
Re: [TowerTalk] Tower Incident Joke, Tom Osborne, 10:07
Re: [TowerTalk] Tower Incident Joke, Fernando EC1CT, 09:45
Re: [TowerTalk] Tower Incident Joke, Alan NV8A, 09:40
Re: [TowerTalk] Tower Incident Joke, jimlux, 09:18
[TowerTalk] Tower Incident Joke, Jim Walker, 09:10
Re: [TowerTalk] Breaking all the tower climbing rules at an, Marlon K. Schafer, 08:54
Re: [TowerTalk] Breaking all the tower climbing rules at an, jimlux, 08:35
Re: [TowerTalk] Breaking all the tower climbing rules at an, Kenneth Goodwin, 07:52
Re: [TowerTalk] Breaking all the tower climbing rules at an, K1TTT, 07:34
Re: [TowerTalk] Breaking all the tower climbing rules at an, Larry Banks, 07:13
Re: [TowerTalk] Shipping Companies, Roger (K8RI), 06:54
Re: [TowerTalk] Breaking all the tower climbing rules at an, jimlux, 06:16
Re: [TowerTalk] Shipping Companies, Bill, 05:29
[TowerTalk] Falling off ladder's., Jim Thomson, 04:02
[TowerTalk] Shipping Companies, Jim Thomson, 03:36

December 02, 2010

Re: [TowerTalk] Shippimg, Mickey Baker, 23:33
Re: [TowerTalk] Breaking all the tower climbing rules at an, David Gilbert, 23:00
Re: [TowerTalk] Breaking all the tower climbing rules at an, Grant Saviers, 22:57
[TowerTalk] Shippimg, Bill Kendrick, 22:30
Re: [TowerTalk] Shipping Companies, Grant Saviers, 21:54
[TowerTalk] Breaking all the tower climbing rules at an, Mike, 21:53
Re: [TowerTalk] TowerTalk Digest, Vol 96, Issue 10, Larry & Karen, 21:20
Re: [TowerTalk] Breaking all the tower climbing rules at an, Robert West, 21:16
Re: [TowerTalk] Breaking all the tower climbing rules at an, Rick Karlquist, 20:52
Re: [TowerTalk] Shipping Companies, Jon Pearl - W4ABC, 20:43
Re: [TowerTalk] Shipping Companies, Roger (K8RI), 20:22
Re: [TowerTalk] Shipping Companies, jimlux, 19:53
[TowerTalk] Breaking all the tower climbing rules at an, Jim Thomson, 19:13
Re: [TowerTalk] Shipping Companies, Mike, 19:05
Re: [TowerTalk] Shipping Companies, David Gilbert, 18:18
Re: [TowerTalk] Shipping Companies, EZ Rhino, 17:15
Re: [TowerTalk] Shipping Companies, Larry, 16:58
Re: [TowerTalk] Shipping Companies, Mark Robinson, 15:48
Re: [TowerTalk] Shipping Companies, Jim McDonald, 15:29
Re: [TowerTalk] Shipping Companies, Scott Ingram, 15:05
Re: [TowerTalk] Shipping Companies, K7LXC, 14:55
Re: [TowerTalk] Shipping Companies, Mickey Baker, 14:26
Re: [TowerTalk] Shipping Companies, scottw3tx, 14:16
[TowerTalk] Shipping Companies, Bill Kendrick, 10:03
Re: [TowerTalk] Breaking all the tower climbing rules at an amazingheight..., Paul_group, 06:37
Re: [TowerTalk] Breaking all the tower climbing rules at an amazingheight..., n4zkf, 05:33
Re: [TowerTalk] Condensation inside LMR-1200 + 7/8" heliax ?, TexasRF, 03:26
Re: [TowerTalk] Breaking all the tower climbing rulesat an amazingheight..., Roger (K8RI), 00:41
Re: [TowerTalk] Breaking all the tower climbing rules atanamazingheight..., Roger (K8RI), 00:39
Re: [TowerTalk] Breaking all the tower climbing rules at an amazingheight..., Ian White GM3SEK, 00:09

December 01, 2010

Re: [TowerTalk] Breaking all the tower climbing rules at an amazingheight..., Mike, 20:40
Re: [TowerTalk] Breaking all the tower climbing rules at anamazingheight..., Neil Sheldon, 20:21
Re: [TowerTalk] Breaking all the tower climbing rules atanamazingheight..., Roger (K8RI), 19:47
[TowerTalk] Condensation inside LMR-1200 + 7/8" heliax ?, Jim Thomson, 19:37
[TowerTalk] Wanted KLM @m yagi insulators, N7KA, 18:16
Re: [TowerTalk] Freezing prop pitch rotor, john, 18:08
Re: [TowerTalk] Breaking all the tower climbing rules at anamazingheight..., Mark Robinson, 17:45
Re: [TowerTalk] Breaking all the tower climbing rules at anamazingheight..., Marlon K. Schafer, 17:33
Re: [TowerTalk] Breaking all the tower climbing rules at an amazing height..., Mike, 17:21
Re: [TowerTalk] Breaking all the tower climbing rules at an amazingheight..., Roger (K8RI), 17:20
Re: [TowerTalk] Breaking all the tower climbing rules atanamazingheight..., bob finger, 17:14
Re: [TowerTalk] Breaking all the tower climbing rules at anamazingheight..., Gene Smar, 16:55
Re: [TowerTalk] Freezing prop pitch rotor, Jim Hargrave, 16:16
Re: [TowerTalk] breaking all the rules, Barry Merrill, 16:04
Re: [TowerTalk] Breaking all the tower climbing rules atanamazingheight..., Marlon K. Schafer, 15:41
Re: [TowerTalk] Breaking all the tower climbing rules at anamazingheight..., Mark Robinson, 15:29
[TowerTalk] Freezing prop pitch rotor, john, 15:22
Re: [TowerTalk] Breaking all the tower climbing rules at an amazingheight..., Tom Osborne, 15:06
Re: [TowerTalk] breaking all the rules, Gregg Seidl, 14:37
Re: [TowerTalk] Breaking all the tower climbing rules at an amazing height..., Pete Smith, 14:34
[TowerTalk] Breaking all the tower climbing rules at an amazing height..., Joe Giacobello, K2XX, 14:12
[TowerTalk] Freezing prop pitch rotor, Jim Thomson, 13:17
Re: [TowerTalk] Freezing prop pitch rotor, K7LXC, 13:11
[TowerTalk] Freezing prop pitch rotor, Zivney, Terry L., 12:00
Re: [TowerTalk] trying 3 different T-tuner suggester programs: TLW seems to lead an unwary user (me) astray., Steve Hunt, 11:41
Re: [TowerTalk] trying 3 different T-tuner suggester programs: TLW seems to lead an unwary user (me) astray., David Gilbert, 09:31
Re: [TowerTalk] tuners and power rating, Steve Hunt, 09:26
Re: [TowerTalk] TowerTalk Digest, Vol 96, Issue 1, RDStraw, 09:15
Re: [TowerTalk] tuners and power rating, Paul Christensen, 08:41
Re: [TowerTalk] tuners and power rating, Steve Hunt, 07:57
Re: [TowerTalk] tuners and power rating, Paul Christensen, 07:30
Re: [TowerTalk] tuners and power rating, Steve Hunt, 06:52
Re: [TowerTalk] FW: Ground Rods, jimlux, 06:43
Re: [TowerTalk] Ground Rods, jimlux, 06:32
Re: [TowerTalk] tuners and power rating, jimlux, 06:27
[TowerTalk] FW: Ground Rods, Neil Sheldon, 06:25
Re: [TowerTalk] tuners and power rating, Paul Christensen, 05:45
Re: [TowerTalk] Ground Rods, Jim W7RY, 05:08
Re: [TowerTalk] Ground Rods, Jim W7RY, 05:08
Re: [TowerTalk] Ground Rods, David Robbins, 04:56
[TowerTalk] Hygain acquisition?, Mat Eshpeter, 04:51
Re: [TowerTalk] tuners and power rating, Steve Hunt, 04:44
Re: [TowerTalk] tuners and power rating, Dan Zimmerman N3OX, 04:14
[TowerTalk] trying 3 different T-tuner suggester programs: TLW seems to lead an unwary user (me) astray., Kevin Normoyle, 00:21