Towertalk
[Top] [All Lists]

Re: [TowerTalk] Crimp tool for cable ends

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Crimp tool for cable ends
From: Mike <nf4l@nf4l.com>
Reply-to: nf4l@nf4l.com
Date: Wed, 29 Dec 2010 06:56:46 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
On 12/28/2010 7:52 PM, Dan Evans wrote:
> I am considering taking the plunge and buying my first crimp tool to
> install coax connectors.  Currently I solder all of my connectors, but
> this is a slow process and from what I have read crimp connections are
> now just as good, if not better.
>
> I normally use LMR400, RG8, or RG8X cable, and I will be installing
> PL-259's and N connectors.
>
> Can you recommend a good set of affordable crimpers?  If you were buying
> a set for your station, what would you buy?
>
> Thanks,
>
> 73
> Dan
I got mine here, along with a coax stripper. The crimper has changable inserts.

http://www.hamcq.com/tools/crimping-tools-and-dies/cat_109.html

73, Mike NF4L
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>