I like this idea, maybe not a big alum wheel but there are several easy to
get aluminum bicycle or motorcycle wheel to buy at the junk yard , those have
the holes
and maybe a little work and have the solution, cheaper to provide a solution
and
less work, BUT if you want something NICE, do not loose the time and order
the DXE Radial Plate, those are very nice looking.
I'm a practical guy with more interest to have something that will not rust
and less maintenance need during the time,
even a few pieces of angle will make it, those electrical joint bar will
rust
the bolts very soon if are not soaked in anti oxidant.
J.Hector Garcia XE2K / AD6D
Mexicali B.C DM22fp
P.O.Box 73
El Centro CA 92244-0073
http://xe2k.net
________________________________
From: Bob Matthews <kt3rr@verizon.net>
To: towertalk@contesting.com
Sent: Mon, January 10, 2011 3:49:46 PM
Subject: [TowerTalk] homebrew radial ring
I use bent aluminum rims from auto body shops. I ask at local body shops if
they
have a bent al. rim they would care to donate to a good cause (Ham Radio) and
usually get them for free once I tell them of all the good things Ham Radio has
done.
I drill the perimeter and use stainless steel sheetmetal screws to attach
wires.
I've had mine in for over 21 years with no problems.
Bob KT3RR
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|