Actually the M2 controller already has a point and shoot capability. It is
just exceedingly cumbersome to use? One has to remember the proper sequence
of buttons to get to a menu that allows one to select the desired "point"
desired; and also remember what the numbers 1 to 10 correspond to, i.e. the
"point/degrees" that the controller will send the rotator to!
k7puc
----- Original Message -----
From: <k2qmf@juno.com>
To: <lists@subich.com>
Cc: <towertalk@contesting.com>
Sent: Wednesday, March 02, 2011 4:09 PM
Subject: Re: [TowerTalk] OR-2800PX Point and Shoot?
> Hi Joe,
>
> Many Thanks for your input!
> I guess the modification for Point and Shoot would be
> to involved and too expensive.
> As you said, it is too bad M2 didn't design it into their controller
> in the beginning...
>
> Thanks again.
>
> 73,
> Ted K2QMF
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|