Towertalk
[Top] [All Lists]

Re: [TowerTalk] OR-2800PX Point and Shoot?

To: towertalk@contesting.com
Subject: Re: [TowerTalk] OR-2800PX Point and Shoot?
From: jimlux <jimlux@earthlink.net>
Date: Wed, 02 Mar 2011 17:53:54 -0800
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
On 3/2/11 2:42 PM, Joe Subich, W4TV wrote:
>
>>> The cost of engineering a Green Heron-esque mod for an existing
>>> control box would likely far exceed that, which may explain why M2
>>> isn't interested in reinventing Green Heron's wheel.
>
> Only because M2 is too lazy to bother.  Any controller capable of
> RS-232 input should have more than enough processor processor power
> to support point and shoot operation if that feature had been part
> of the initial design.  Unfortunately, an aftermarket modification
> would require essentially a complete rewrite of the controller
> firmware to support a potentiometer input.
>

Since the M2 has a RS232 control interface, what about some sort of 
cheap box that reads a pot and spits out the appropriate control message.

There are such thing floating around out there on the web.  Look at 
robotics sites or mechanical gadget/animation people.

Kind of like the R/C servo testers that have a pot and a 555 to generate 
the 0.5 to 1.5 ms pulses  a servo wants to see.
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>