Did the rotator work before you put it back up? If so, perhaps your cable
is undersized for that length?
John KK9A
To: towertalk@contesting.com
Subject: [TowerTalk] yaesu g800sa
From: Stevo B <stevobags@gmail.com>
Date: Mon, 2 May 2011 13:58:31 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Hey Guys,
So, I put the antenna and rotor back up yesterday. My rotor refuses to
turn. I am running about 350 feet from the controller to the rotor.
Anyone know of a way to check from the ground if the rotor is good and
possibly just the control box. I looked inside the control box and only
four wires go to the pin assembly. Can I just apply power to two of the
correct wires to see if it works?
Appreciate any help you might have.
Steve
N2MAI
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|