You're lucky. I got no where trying to install ground rods with a sledge
hammer in my shale and clay soil. I used a large electric jack hammer to
install them and even with this machine I was only partially successful.
John KK9A
To: <jtml@vla.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Copper ground rod driver
From: "Mark Robinson" <markrob@mindspring.com>
Date: Wed, 25 May 2011 19:26:54 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Yes I tried that fence post tool but I preferred to use a lump hammer and
then switch to a sledge when the going got tougher. I was able to get 10
foot ground rods in below ground level. Some were easier than others
The Tractor Supply place had them.
Mark N1UK
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|