Towertalk
[Top] [All Lists]

Re: [TowerTalk] Self-supported tower designs

To: richard@karlquist.com
Subject: Re: [TowerTalk] Self-supported tower designs
From: Doug Dietz <dcdietz@chartermi.net>
Date: Thu, 14 Jul 2011 20:55:01 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I have all the stress and load calculations for the triex lm-354 if needed . 
Doug WD8Z
On Jul 14, 2011, at 7:58 PM, Rick Karlquist wrote:

> You can get the tower design calculations for commercially
> made towers from their respective manufacturers.  They
> want you to use these to get a building permit.  However, the
> ones I have seen are detailed enough that you can simply
> copy the design and pretty much be assured that it will
> stay up.  They don't make you sign anything saying you
> will not copy their design.  The calcs also can be used
> as a guide to making modifications to the original design,
> in case the material is different, or the dimensions are
> slightly different (metric tubing instead of imperial tubing, etc).
> 
> 
> Rick N6RK
> 
> 
> 
> Steve Maki wrote:
>> The OP is looking for designs to construct the tower, while your link
>> shows an install, impressive as it is, using commercial tower parts.
>> 
>> Although if time is money, constructing a tower from scratch is not a
>> good financial deal.
>> 
>> BTW, there has been at least two other installs in MI almost exactly
>> like the 83 QST example (maybe inspired by), and each of the owners met
>> an untimely death. Just sayin ...:-)
>> 
>> -Steve K8LX
>> 
>> On 7/14/2011 4:11 PM, K8RI on TT wrote:
>>> On 7/14/2011 3:38 PM, Máximo EA1DDO_HK1H wrote:
>>>> Hi all,
>>>> 
>>>> I am thinking to build a self-supported tower for my HK1H´s station.
>>>> The tower could be around 25 meters high. Four sides
>>>> Thinking in something like this;
>>> 
>>> How about this one? It's triangular, but a real brute!
>>> http://www.rogerhalstead.com/ham_files/skyhook.htm
>> 
>>>> http://3.bp.blogspot.com/_umpsa6tUB2I/SoPi1PjpbtI/AAAAAAAAABk/9DQ2BrH3jek/S660/PANORAMICA.JPG
>>>> 
>>>> or this one;
>>>> 
>>>> http://farm1.static.flickr.com/98/383631062_89cc03d2f0.jpg
>>>> 
>>>> What I need is a design layout to know what size pipes to use.
>>>> Anyone knows where can I found them?
>> 
>> 
>> _______________________________________________
>> 
>> 
>> 
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>> 
>> 
> 
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>