Towertalk
[Top] [All Lists]

Re: [TowerTalk] Bull pin / drift pin

To: <TexasRF@aol.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Bull pin / drift pin
From: "Pete Raymond" <n4kwpete@centurylink.net>
Date: Mon, 29 Aug 2011 13:33:18 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I have found Drift Pins in the tool section of Sears.  They carry a few 
different sizes, a great tool.
73 Pete N4KW

----- Original Message ----- 
From: <TexasRF@aol.com>
To: <dieven@comcast.net>; <towertalk@contesting.com>
Sent: Monday, August 29, 2011 7:48 AM
Subject: Re: [TowerTalk] Bull pin / drift pin


> Dick, you might try an automotive parts store. Many of them have some
> pretty big tools to sell.
>
> 73,
> Gerald K5GW
>
>
>
>
> In a message dated 8/29/2011 6:29:18 A.M. Central Daylight Time,
> dieven@comcast.net writes:
>
> I find  myself without a drift pin to align the leg holes in Rohn 55G 
> tower
> sections (5/16” bolt size).  I need to pull together several  sections on
> the
> ground with a couple of come-alongs.  We plan to use a  crane to lift
> preassembled sections and I don’t to do these one at a time  at crane 
> rental
> rates.
>
>
>
> Where do I find a good drift pin /  bull pin / barrel pin for this 
> purpose?
> Klein Tools and  SteelErectorTools.com offer some really hefty ones for
> steel
> construction,  and I’ve found little drift punch sets at Sears and Ace
> Hardware and Harbor  Freight, but not one that’s about the right size for
> this. I think a ¼”  point diameter would be about right, maybe the large
> diameter would be ¾”,  perhaps 6” long?
>
>
>
> Something that cleared the holes a little bit  so I didn’t have to force 
> the
> bolts through would be helpful.  These  are new sections that haven’t met
> one
> another before. I got the top plate  on with a rubber mallet, but that’s 
> not
> going to work with 100# tower  sections.
>
>
>
> Thanks!
>
>
>
> Dick,  K6KR
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk  mailing  list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>