K8RI on TT wrote:
>On 9/6/2011 4:53 PM, Gene Fuller wrote:
>> Hi Jim -
>>
>> In defense of the PPM's - Have you ever opened one up and seen how they're
>> built ? I would guess that any motor shop could rewind the "coils". The
>> bearings and brushes are obtainable. The gear box, if tended to, should last
>> forever, or at least have replacements available for longer than any of the
>> current rotators will be supported by their manufacturer or NEMA. They may
>> be an overkill for many of the jobs they're asked to do, but my guess is
>> that they will outlive most of us who are using them.
>
>They already have! <:-))
>Consider what they were designed to do do, when, and their normal
>operating environment.
>
You Know You're A Ham, If: You see an old Superfortress in full flying
condition and you think, "Hmmm... four prop pitch motors."
>We used to be able to pick the things up for next to nothing as many
>surplus shops had them by the hundreds or even thousands. I remember
>seeing 55 gallon drums full of the things. IIRC they went for between
>ten and twenty bucks.
Roger, stop doing that - it hurts!
--
73 from Ian GM3SEK
http://www.ifwtech.co.uk/g3sek
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|