Towertalk
[Top] [All Lists]

Re: [TowerTalk] Paint removal?

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Paint removal?
From: K8RI <K8RI-on-TowerTalk@tm.net>
Date: Sun, 04 Dec 2011 12:53:31 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
On 12/4/2011 9:35 AM, Jim Lux wrote:
> On 12/3/11 4:02 PM, Roger wrote:
>> On 12/3/2011 6:47 PM, Mike wrote:
>>> Don't forget Harbor Freight have a Baking Soda Blaster, does a great job
>>> like a sand blaster without the damage: -)
>> It's just a sand blaster with a smaller nozzle.  Many better quality
>> blasters have various size nozzles available.
>> OTOH soda will remove galvanizing if left on one spot too long or if the
>> air pressure is too high.
>>
>> You can also replace the sand with small glass beads (bead blaster)
>> which works quite well.
>>
> what about walnut shells?
They're another good one although usually used for polishing. With 
enough pressure  and the proper size I'd expect they'd work.
They're often used in a tumbler to polish brass.

73

Roger (K8RI)

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>