Towertalk
[Top] [All Lists]

Re: [TowerTalk] Balun Recommendation

To: Ian White GM3SEK <gm3sek@ifwtech.co.uk>
Subject: Re: [TowerTalk] Balun Recommendation
From: "Joe Giacobello, K2XX" <k2xx@swva.net>
Reply-to: k2xx@swva.net
Date: Sat, 21 Apr 2012 11:53:34 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Finally, an explanation.  Thank you, Ian.

73, Joe
K2XX

On 4/21/2012 5:17 AM, Ian White GM3SEK wrote:
> [1] The concept of "common mode current" was originally developed for
> twin-wire lines, on which signals are carried by equal-and-opposite
> differential currents. Any inequality or phase error between the
> currents on the two wires can be represented as a separate current
> flowing equally and in phase on BOTH wires - which is what the word
> "common" was originally meant to imply. In other words, common-mode
> current makes a twin-wire line behave like a single wire. Contrary to
> popular belief [2], both the differential (transmission-line signaling)
> currents and the common-mode currents will coexist freely on the same
> twin-wire line.
>
> Engineers have borrowed this label "common mode" from twin-wire
> transmission lines, and have also applied it to any current flowing on
> the outside surface of a coax shield, for any reason. This isn't
> accurate usage because the geometry of coax is completely different from
> twin-wire, effectively giving us three conductors instead of two... but
> RF engineers seem to revel in twisting the English language until it
> points newcomers in entirely the wrong direction.
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>