i thought about that years ago also and decided the best option was to just
optimize the lengths. this resulted in one director being eliminated
electrically, but in order to keep the weight and wind balance i left it in
place but shortened it so it wasn't really doing anything for the pattern. if
you start trying to move elements you would have to do lots of machining or
just figure methods of doing it by cutting pieces off the boom... i decided
that in the long run it was better to keep it mechanically intact.
May 2, 2012 09:59:50 AM, n8de@thepoint.net wrote:
Telrex elements go THROUGH the boom. Not sure how you would change
element spacing without needing to change the boom entirely.
If they were mine, I'd put them up and let them play!
73
Don
N8DE
Quoting Dave Sublette :
> Good morning,
>
> I have two six element, 46 foot boom, 20 meter Telrex yagis. One of them
> I bought in 1979 and the other in 1993. One is in the air and the other
> is in my barn. I have had excellent results with this antenna
> electrically and mechanically. When I put the one up several years ago,
> I "optimized" the element lengths(without changing element spacing) with
> a computer program.
>
> Now I am thinking that maybe I might redesign it and try to optimize the
> element spacing and, as has been suggested before, eliminate one element.
>
> Is there anyone on this list who has done this? Before I go
> "re-inventing the wheel" I thought it would be good to ask. Also, is
> there one antenna design program that you might think is better for the
> job than the others?
>
> Thanks for your time.
>
> 73,
>
> Dave, K4TO
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|