I am replacing my current LM-470D Tri Ex tower with possibly another one. When
I do, I want to use a different rotor in it. Currently I am using a Ham IV with
beefed up parts and that has held up reasonably well but not without failure.
The paperwork I have for the LM 470 says a “Ham” style rotor or a small prop
pitch is what will fit. I am also aware that these parameters were written many
years ago and circumstances have changed and new rotors have come onto the
market. I am aware that if one uses spacers between the rotor plate and the
base of the rotor that a T2X will fit in the tower. That’s good but what else
will also fit the tower? What kind of rotor, different from a Ham-IV or T2X are
you using in your LM 470 D tower or do you know of someone using something
other than what I have mentioned?
Thanks very much
Bill AD8P
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|