Towertalk
[Top] [All Lists]

[TowerTalk] Mast Bracket ideas solicited.

To: "Tower Talk" <towertalk@contesting.com>
Subject: [TowerTalk] Mast Bracket ideas solicited.
From: "Larry Banks" <larryb.w1dyj@verizon.net>
Date: Sat, 28 Jul 2012 18:02:50 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Hi TTers,

I am adding a mast to the side of my place in Maine for a small HF antenna of 
~5 ft^2 wind load and ~25 lbs.  I wish to design a bracket for the side of the 
house to hold this mast.  The challenges:

        - it will be a rotating mast
        - it will be tilted down for antenna access

Therefore this bracket must allow for the rotation of the mast -- it can't be a 
tight "U-Bolt" type of attachment, and it must be easy to disengage, to allow 
for tilting the mast.  My current thoughts are along the lines of using 2 in. 
thick hardwood with a u-shaped cutout and an easy-to-open gate of some sort.

I would appreciate any thought, ideas, pictures of designs any of you have 
built, purchased, etc.

73 -- Larry -- W1DYJ

---------------------------------------------------
Larry Banks
Amateur Extra
Licensed since 1962
W1DYJ since 1966

Massachusetts: FN42kl
Maine: FN43xs
ARRL   DXCC   WAS   WAC   VUCC
        QCWA                 1010
YCCC    PARC   MMRA   MARA   N.E.W.S.
larryb@alum.mit.edu
http://www.qsl.net/w1dyj/
--------------------------------------------------
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>