On 8/20/2012 11:17 AM, Tom Harke wrote:
> I am in the process of preparing the guys for my latest tower project. I
> am looking for recommendations on attaching the Phillystran guys to the
> tower torque arms. I can shackle the guy directly to the torque arm or
> use a approx 5-6 feet of 1/4" EHS with Big Grips attached to the torque
> arms and then shackle to Philly to the 1/4" EHS.
> I would appreciate any input on which would be the best way to do this.
It really doesn't make any difference unless you are shunt feeding the
tower. And you can tune around that.
Like John, I'd use star guying if tower twisting is an issue.
Mine came with relatively short torque arms, so I did use them, but
twisting is not an issue and wasn't even when I had the big array up there.
73
Roger (K8RI)
>
> Thanks
>
> Tom AA9A
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|