Towertalk
[Top] [All Lists]

Re: [TowerTalk] M2 40M4LLDD

To: n2ic@arrl.net
Subject: Re: [TowerTalk] M2 40M4LLDD
From: David Fuller <nn5k.mail@gmail.com>
Date: Wed, 5 Sep 2012 09:30:55 -0600
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Mine has been up since 2005 in NM very similar conditions but with some ice
at 7200 ft.   It has outlasted a Steppir and a Tic ring rotor.   I also
agree with the SWR issues with wind.   I built mine with the longer element
lengths but I have had amps kick out by SWR spikes due to wind at the
bottom of the band.

-Dave NN5K


On Wed, Sep 5, 2012 at 7:06 AM, Steve London <n2icarrl@gmail.com> wrote:

> I have had a 40M4LLDD up for over 5 1/2 years. No problems, mechanically.
> I live in a windy location (20 MPH every day, and up to 75 MPH every year),
> but no ice.
>
> One interesting issue is the SWR behavior at the band edges. If you look
> at the published SWR curves, you'll see that the SWR rises sharply just
> outside of the band. Those curves are correct for calm winds. However, even
> in a mild wind, the element spacing and shape change enough to push that
> knee of the curve into the band, resulting in high and varying SWR inside
> one of the band edges.
>
> 73,
> Steve, N2IC
> ______________________________**_________________
>
>
>
> ______________________________**_________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/**mailman/listinfo/towertalk<http://lists.contesting.com/mailman/listinfo/towertalk>
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>