Hello Folks,
I need some suggestions on a heavy duty rotor. First, my conundrum.
I have a Universal HD21-70 tower with an Optibeam 12-4. The rotors have
been all Prosistel brand. Three of them in 2 years! All replaced because of
failure due to design flaws or bad parts. The first two were 2051 series
and the one that I just put up in August 2012 is a 61d series. That just
failed two days ago. It just stopped turning. First thoughts were that
the shear pin is broken. However upon testing with a 12v supply, there are
no amps being drawn leading me to believe the motor is dead. Exactly 3
months later its dead! What's the deal with these rotors?
Anyway, needless to say I now have to replace the rotor again. What say
the masses for a product that is of quality and durability which can turn
the OB12-4? Its time to change manufacturers. There must be something
going on with the quality of workmanship with Prosistel( sorry Gianni I
cant make this up).
Thank you for any help and/ or suggestions.
Anthony (N2KI)
Sent from mobile.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|