Towertalk
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [TowerTalk] Wire for prop pitch?

from [Dick Dievendorff] [Permanent Link][Original]
To: "'Rich Hallman - N7TR'" <[email protected]>, <[email protected]>
Subject: Re: [TowerTalk] Wire for prop pitch?
From: "Dick Dievendorff" <[email protected]>
Date: Tue, 4 Dec 2012 10:51:47 -0800
List-post: <[email protected]">mailto:[email protected]> 
I bought a spool from Home Depot.

Dick


-----Original Message-----
From: TowerTalk [mailto:[email protected]] On Behalf Of Rich
Hallman - N7TR
Sent: Tuesday, December 04, 2012 10:32 AM
To: [email protected]
Subject: [TowerTalk] Wire for prop pitch?

I'm installing a k7nv prop pitch rotor in a few months and wanted to know
what and where others have purchased their 10 gauge 3 conductor wire from?
This will be around 350 feet long and need to bury the run.   I looked at
10/2 romex with ground and may be the best option.

Thanks....
Rich.    N7TR
_______________________________________________



_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [TowerTalk] Wire for prop pitch?, Rich Hallman - N7TR
Next by Date:  Re: [TowerTalk] Wire for prop pitch?, Rick Karlquist
Previous by Thread:  [TowerTalk] Wire for prop pitch?, Rich Hallman - N7TR
Next by Thread:  Re: [TowerTalk] Wire for prop pitch?, bill ny9h
Indexes:  [Date] [Thread] [Top] [All Lists]