On 2/19/2013 9:14 AM, K7LXC@aol.com wrote:
Actually IMO you're better off. In my book, UP THE TOWER, in the
chapter on crank-ups, my advice is to always be watching the tower as it's
moving because if you're not - you can have a calamity. So the safest way to
raise and lower the tower is to be at the bottom of the tower and be ready to
shut things down in case something happens. And it does happen.
Retro-fitting anything to a UST can be problematic.
Exactly right.
I have the UST remote for my tower and just use it to watch from 20 feet
away so I am not standing under the antenna. In your case, just wire a
3 conductor cable in parallel with the SPDT up/down switch
and run that to a toggle switch in a box. Compared to this poor
man's remote, the "official" remote doesn't bring much to the party
except remote limit switch indicators.
Rick N6RK
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|